BDDS
Active Member
Full Member
- Messages
- 145
- Reaction score
- 31
Good point, and look at what version of scan suite you are running
S
sirmorty
Active Member
Full Member
- Messages
- 616
- Reaction score
- 37
You get those errors no matter which scanner is hooked up?
CoolHandLuke
Idiot
Full Member
- Messages
- 10,096
- Solutions
- 1
- Reaction score
- 1,411
5072 is the current version, so its not a version thing, i just think the software has glitched and needs reinstalling
E
erzdaemon
Member
Full Member
- Messages
- 64
- Reaction score
- 0
Fiddled around with similar issue some time.
In my case the USB Device ( 3shape D800 Scanner ) got installed as virtualblabla-Device after playing around with some USB network sharing tools.
TLDR: If you run into this it may help if you try to find out which driver is currently installed for the connected scanner ( open device manager > USB Controllers, plug/unplug the scanner-usb cable to see which Device is going on and off ) and then while connected again right click uninstall this device.
Then unplug/reconnect scanner and it might install correctly again as in my case.
here we go 2014 problem maybe solved
cheers
In my case the USB Device ( 3shape D800 Scanner ) got installed as virtualblabla-Device after playing around with some USB network sharing tools.
TLDR: If you run into this it may help if you try to find out which driver is currently installed for the connected scanner ( open device manager > USB Controllers, plug/unplug the scanner-usb cable to see which Device is going on and off ) and then while connected again right click uninstall this device.
Then unplug/reconnect scanner and it might install correctly again as in my case.
here we go 2014 problem maybe solved
cheers
