T
tuyere
Active Member
Full Member
- Messages
- 411
- Solutions
- 2
- Reaction score
- 0
What's something we can apply to green zirconia to stop parts from sticking if they're in contact in the furnace? "Don't let them touch", I know, but this is a weird case where it's unavoidable-
We're playing around with adding extra support for ZIBs and other very large units that seem to sag or warp across large unsupported spans (or across spans with no thermal sinking to the furnace, the mechanism could go either way),and one option we're trying is using green zirconia supporting parts across those areas, and firing them simultaneously with the ZIB.
I saw one post from 2012 about how they use Pam spray to separate them, but nothing else beyond that. Any tips for something that won't contaminate the part, or negatively impact the appearance?
We're playing around with adding extra support for ZIBs and other very large units that seem to sag or warp across large unsupported spans (or across spans with no thermal sinking to the furnace, the mechanism could go either way),and one option we're trying is using green zirconia supporting parts across those areas, and firing them simultaneously with the ZIB.
I saw one post from 2012 about how they use Pam spray to separate them, but nothing else beyond that. Any tips for something that won't contaminate the part, or negatively impact the appearance?