K
keroassidy
Active Member
Full Member
- Messages
- 105
- Reaction score
- 30
So we received case from Dr. with WN parallel implant. We have a 3shape d500 scanner and Roland dwx_51d mill. Nobel's website says 3shape compatible , however a few months ago i wanted to send files to nobel and they said they couldn't received my stl files cause it came from a d500 machine. Not sure how my machine outputs a different stl file than say a 700?
Dr. wants a screw retained zirconia crown, however this office is unique in that they prefer a titanium milled abutment with a zirconia full contour w/ screw access hole to be bonded at their office.
So fellas , Any insight or help , or experience with this system. Thanks for any info/help!
Dr. wants a screw retained zirconia crown, however this office is unique in that they prefer a titanium milled abutment with a zirconia full contour w/ screw access hole to be bonded at their office.
So fellas , Any insight or help , or experience with this system. Thanks for any info/help!