DMC
Banned
- Messages
- 6,378
- Reaction score
- 260
Can you tell me how to change the .pro PLC program used by Beckhoff CNC Controler in the Lava mills?
I am exceeding the Loading buffer inturperter. (Channel 2)
I worked with Beckhoff and others, but the normal 3M Service passowrd does not allow changes to the TwinCAT_PLC XXX.pro file that has the program the mill runs.
It is password protected file.
Is this protected by Primacon, or ESPE Seefeld, or ??
My G-code Instructions are larger than the inturpreter buffer, and we have to reset the mill and press continue to proceed milling.
Not a problem with the older Lava Forms running IBH PowerAutomation stuff.
I pulled out the .pro file and sent it to Beckhoff, but they could not open it to edit it using TwinCAT PLC Editor.
I just need a simple change to raise the current parameter of 19200 to ?? 30000 max file size. (Just guessing?)
My other option is just to not fill my blocks with teeth, and run only partially filled blocks...lots of them.
Scott
I am exceeding the Loading buffer inturperter. (Channel 2)
I worked with Beckhoff and others, but the normal 3M Service passowrd does not allow changes to the TwinCAT_PLC XXX.pro file that has the program the mill runs.
It is password protected file.
Is this protected by Primacon, or ESPE Seefeld, or ??
My G-code Instructions are larger than the inturpreter buffer, and we have to reset the mill and press continue to proceed milling.
Not a problem with the older Lava Forms running IBH PowerAutomation stuff.
I pulled out the .pro file and sent it to Beckhoff, but they could not open it to edit it using TwinCAT PLC Editor.
I just need a simple change to raise the current parameter of 19200 to ?? 30000 max file size. (Just guessing?)
My other option is just to not fill my blocks with teeth, and run only partially filled blocks...lots of them.
Scott
Last edited: