How bout sharing some wax ups.

[2oothguy]

Ok i know this cant be that hard. How do you post pics on here from photo bucket. Were do i find the ulr on the photo i want to post.

 

[JohnWilson]

Gappy gap gap

 

[ParkwayDental]

Gappy gap gap

Damn John since when did you start working in Alabama?

 

[JohnWilson]

LOL this one is actually going to New Jersey, every ant tooth has a twist and turn to it, the picture does not do it justice, fast and iphone makes it what it shows

I will bet that it will come back with a happy face on the script thats says GO TO FINISH pt loves it.

 

[2oothguy]

LOL this one is actually going to New Jersey, every ant tooth has a twist and turn to it, the picture does not do it justice, fast and iphone makes it what it shows

I will bet that it will come back with a happy face on the script thats says GO TO FINISH pt loves it.

ok how do you upload your photos with the iphone?

 

[Marcusthegladiator CDT]

LOL this one is actually going to New Jersey, every ant tooth has a twist and turn to it, the picture does not do it justice, fast and iphone makes it what it shows

I will bet that it will come back with a happy face on the script thats says GO TO FINISH pt loves it.

Good job, What kind of product are you building...
I have the same waxer, i hate that it tuns off by itself...
Im waxing some uppers at the moment im duplicating it, if i like it ill post pics this evening of the before and after. Right now its duplicated and the stone is setting... I love the way it looks in stone after the waxup. But I also need a stone model to build some proper prep guides and matrix for the doctor without slicing through the wax with my exacto.

 

[droberts]

F/U immediate, doctor prefers smooth finish. Not as twisted as Johns...
It is nice when they come back with the happy face, quote "process and finish".
Have a great weekend everyone

 

[JohnWilson]

Nice Danny!

Here is the last one I did today, not bad for a Friday after Staff appreciation day lunch

 

[JohnWilson]

ok how do you upload your photos with the iphone?

You still have to host it or use Tapatalk app

 

[JohnWilson]

Another one

 

[RileyS]

ok how do you upload your photos with the iphone?

I just click "go advanced" to reply then click paper clip. Brings you to upload page where you can use your phones gallery to upload or computer if you're using that.

 

[GAP]

A couple diagnostics I did the other day





and the before

 

[Austin]

This is my first post thought I would share a full mouth I did the other day.

image by Austin Stevens, on Flickr

 

[rod]

very good!
nice wax up man

 

[AJEL]

This weekends change in plans. Case was mounted on mag articulator for lower partial denture. Came in with a bite and a new upper cast. Patient now wants immediate upper / lower partial. Changes doesn't like rabbit look. Move Anterior apically 3mm lingual 3mm. I HIP mounted new master cast & mounted lower on pin articulation. I also took old cast & mounted it on same articulator )nice thing about magnetic articulators).

[/URL][/IMG]

I removed all the upper teeth except rt central and set teeth in a nice red wax. The stone tooth shows new teeth position in relation to old, Dr will be reducing the plate to accommodate changes.

[/URL][/IMG]
Someone asked (in a PM) if there is a way to level a set up and what is the hole in the setup plate for.

[/URL][/IMG]

Just another picture after wax up. Comparing to original cast from when it was for a lower partial.

[/URL][/IMG]

Out of flask & back on articulator to check bite.

[/URL][/IMG]
This also needed a surgical guide for how much bone to reduce. When the case was in flask (after boilout) I use an extra flask top and pour hydrocoloid in to duplicate how cast has been trimed and then wax up for a clear baseplate.

[/URL][/IMG]

Received it May 29 DDS went on vacation until Jun 4th I needed a confirmation and the case went to Place Jun 10 (with a bit of a rush charge.Articulation set-up picture confirmation, reset lower partial for more evenness, & process.)

[/URL][/IMG]

 

[Marcusthegladiator CDT]

This weekends change in plans. Case was mounted on mag articulator for lower partial denture. Came in with a bite and a new upper cast. Patient now wants immediate upper / lower partial. Changes doesn't like rabbit look. Move Anterior apically 3mm lingual 3mm. I HIP mounted new master cast & mounted lower on pin articulation. I also took old cast & mounted it on same articulator )nice thing about magnetic articulators).

It looks really good. I'd love to see the patients before and after. And I like that plate on the pin, Im going to have to find something like that to fit our art's for the next time we have a large upper/lower case. I usually just build one arch ideally and follow through with the opposing arch. I would rather build the plane to the plate and then carve into maximum excursion/function after... Thanks for sharing...

 

[AJEL]

Im going to have to find something like that to fit our art's for the next time we have a large upper/lower case. I usually just build one arch ideally and follow through with the opposing arch.

Thanks Marcus I usually build the upper to the lower ridge crest posterior (this is just a trick for this kind of strange case, or for checking if something looks canted.). I have done this with clear plastic window pane 1/8"thick , this was from Ace Hardware 1/8"thick aluminum from the hobby area cut 3"x3" drill pressed #2 holes 1/4" & 3/8th" (dad & I made a bunch of these in 1975 & handed them out at an IL meeting when we did some tricks clinics.) I have since made one for my Stratus in both clear & aluminum 3" x 5".

 

[k2 Ceramic Studio]

Love what you denture guys do, fantastic work.

This was a case done last year I think, surgeon wanted a diagnostic to check the overall look then wanted it in pmma to rehabilitate the patient.










All the best Pete

 

[Tayebdental]

K2,
Great work, what articulator are you using?.

 

[k2 Ceramic Studio]

Thanks pal, it's a KaVo Protar. Some of our guys have the facebows for them so we had to get a couple.