D
designdent
New Member
- Messages
- 6
- Reaction score
- 0
Do you know something about this scaner and the application?
http://www.shining3dscanner.com/en-us/product_dentalscan.html
http://www.shining3dscanner.com/en-us/product_dentalscan.html
D
designdent
New Member
- Messages
- 6
- Reaction score
- 0
no one can help me with some information's about this scanner?
rkm rdt
Well-Known Member
Full Member
- Messages
- 21,447
- Reaction score
- 3,288
It's from china.
CoolHandLuke
Idiot
Full Member
- Messages
- 10,096
- Solutions
- 1
- Reaction score
- 1,411
1.3 Mpix cameras mean this scanner is very poor quality.
watch the video you can SEE the filled in holes where the scanner auto filled missing data.
its big too. reminds me of the d250, except with multi die scanning.
watch the video you can SEE the filled in holes where the scanner auto filled missing data.
its big too. reminds me of the d250, except with multi die scanning.
ice_pascu
Active Member
Full Member
- Messages
- 143
- Reaction score
- 7
It was 2 X 1.3mp cameras( they told me).The dealer price is very nice
P
primus
Banned
- Messages
- 861
- Reaction score
- 82
Why not a Medit for a little more?
I would not trust a Chinese scanner.
1.3mp is fine.
Many Medits, Steinbichlers, and tons of others used this resolution. Some still do.
B&D's Korean scanner also uses 1.3mp cameras.
The original Lava ST scanner had only a 0.8mp camera I believe. And that is still a bad-a55 scanner and very accurate!
??
I would not trust a Chinese scanner.
1.3mp is fine.
Many Medits, Steinbichlers, and tons of others used this resolution. Some still do.
B&D's Korean scanner also uses 1.3mp cameras.
The original Lava ST scanner had only a 0.8mp camera I believe. And that is still a bad-a55 scanner and very accurate!
??
