Sold 2021 Roland DWX52-D W/ Quatro PS2

[A2WILLDO]

Hey all!! First time poster here! I have a very low mileage(152hrs) Roland 52-D I've been needing to sell for a few months now. It comes with or without Quatro PS2, that I just replaced the motors in and have a back-up set that need brushes. Comes with 21 Disc holders; 50+ Roland / Sierra Dental / Argen / Primotec Tools for Zirconia, Wax and Pmma; some new and some with a lot of cuts left to give. It has the upgraded heavy duty spindle/motor assembly and I also have an extra spindle w/ collet, +2 additional collets that have very little use, if any. I also have 16 new zirconia discs; mostly Katana HTML with an STML, UTML, ArgenZ ST and Nexxzr T mixed in. Discs could go with the mill for the right price or sold separate. I'm pretty sure it still has a some time on the warranty and additional years can be purchased. Running Millbox through Argen and Roland. Will figure out shipping when time comes, but I would deliver within 150 or possibly 200 miles of Wichita, KS to avoid the mishandling that all the shipping companies have perfected.
Asking $23k for everything or $22k without the Zirconia Discs. Shipping cost TBD

 

[Komprezzor]

Post price plz

 

[A2WILLDO]

Post price plz

Sorry, got it in there now. I would have known if I would have read the rules. ha

 

[A2WILLDO]

bump bump bump

 

[biodentg]

any reason for this sale?

 

[A2WILLDO]

I bought an Arum/Axsys 5x last spring to be able to mill Ti blanks and planned on running both; but lost an employee in April, so I cut back a lot on regular single units to be able to focus on implant and cosmetic cases. So basically, I don't enough crowns or time to justify having both and have been running maybe a crown or two a week on the Roland since May to keep it warm and well stretched. Still under warranty until March of 2023.

 

[A2WILLDO]

Any takers at 19k for everything, including shipping?

 

[OzarkDentalLab]

I am interested in getting in touch with you to with a few questions regarding the mill. if you want to shoot me a message @ 479-721-9372 it would be greatly appreciated!

 

[Lab fransis]

Any takers at 19k for everything, including shipping?

I can take it for 15k including everything

 

[Lab fransis]

I can take it for 15k including everything

Where is your location

 

[Komprezzor]

Pmd you

 

[50mar1]

Did you sell it?

 

[A2WILLDO]

Did you sell it?

No, still available.

 

[A2WILLDO]

Quick question for all the OG members and moderators;
How many accounts on this network would you say are spammers or information harvesters?

 

[sidesh0wb0b]

Quick question for all the OG members and moderators;
How many accounts on this network would you say are spammers or information harvesters?

@Travis can answer that the best since well....hes the man in charge!!!

 

[zero_zero]

Quick question for all the OG members and moderators;
How many accounts on this network would you say are spammers or information harvesters?

Everyone under lets say 20 posts, I think....

 

[50mar1]

I just created an account last week so i'm new to the forum. I'm looking to start a new digital dental lab and was looking at equipment be it used or new. I decided today to purchased new through Imagine USA. I'm hoping it was a wise decision.

 

[vl02soc]

Is this still available?

 

[A2WILLDO]

Is this still available?

Yes, it is.

 

[50mar1]

No, still available

Do you have a number I can call you regarding the zirconia for sale.