finnster68
Yep im an Aussie
Full Member
- Messages
- 137
- Reaction score
- 3
Hi all
Just wondering what you guys are using to "pre-polish" your crowns prior to glazing.
Just did a course with August Bruegera on Emax and he had a fantastic polishing wheel that smooths beautifully without removing the surface texture your have created.
Didnt get to find out what it was
I have silicon rubber type polishers that smooth and shine but they have a tendancy to remove the fine details.
He used a bristle type brush that looked exactly like this green dot one.
http://www.seichong.com/dataroom/bredent/12_12.pdf
I have those Abraso Fix brushes and they do not seem to work very well at all on the porcelain
What do you guys use?
Tony
Just wondering what you guys are using to "pre-polish" your crowns prior to glazing.
Just did a course with August Bruegera on Emax and he had a fantastic polishing wheel that smooths beautifully without removing the surface texture your have created.
Didnt get to find out what it was
I have silicon rubber type polishers that smooth and shine but they have a tendancy to remove the fine details.
He used a bristle type brush that looked exactly like this green dot one.
http://www.seichong.com/dataroom/bredent/12_12.pdf
I have those Abraso Fix brushes and they do not seem to work very well at all on the porcelain
What do you guys use?
Tony