Looking to add a wet mill to our lab

[tuyere]

$80k

But you arent wrong. I love our PM7

Oh. Right. Yeah, that's a pretty persuasive reason.

I would at least consider running it with emax and getting another mill for your existing PM7 work, as TheLabGuy suggests. You'll get a quality mill for less money if you're looking for dry instead of wet, and the PM7 is basically the perfect emax workhorse.

 

[Brett Hansen CDT]

I really appreciate al the feedback on this post. We are not going with Straumann. I love the idea of making our PM7 our wet mill and getting a dry for zirc, but we do so much more zirc than emax I feel like our PM7 would get wasted. We are going to look at the 314 from Axys. Thank you!

 

[DDE]

you can buy an Arum mill down under, but not a versamill.

Thanks for the reply.

What do you think of the Arum?

 

[Toothman19]

If you're still considering a glass only mill, the Redon R-one plus might be an option for you

Redon R-One

Redon R-One+

shop.zublerusa.com

 

[sidesh0wb0b]

If you're still considering a glass only mill, the Redon R-one plus might be an option for you

Redon R-One

Redon R-One+

shop.zublerusa.com

do you know anyone with a Redon?

 

[Toothman19]

I do not. I was hoping someone on here could chime in on the mill

 

[brayks]

Our Versamill 5X-200 has just been validated by Straumann (others to follow) as part of their PNP which brings FDA clearance to our customers milling Srtraumann preface blanks. We are also working with the other Straumann "partners" for our other machines. Within the next month or so, if your Straumann rep is not familiar with us and our machines already, they in all likelihood, will be...

 

[brayks]

Just a point to mention. We have just finished our validation with Straumann on Medentika premills (PreFace blanks) as a preferred PnP partner with Straumann and Neodent up next. Something we are very happy about and proud of.

We are also running a promotion in celebration.



Check out the attached pdf...