Zirconium Sintering Furnace

[Drizzt]

Hi everybody ,

I am looking for a zirconium sintering furnace . Any suggestions ? Thank you .

 

[DMC]

brofurnace.com

You can get cheaper elements, or the "Medical" version which has no impurities, especially no Fe by special request.

You must ask for the same elements that Scott uses!

I have used tons of each type of elements.

Furnace is just as good as anything. I have a little one, and they made me my BIG one as well.

Tell them Scott sent ya!

Choose size of chamber you need, tell them Voltage you have.

This company makes the same furnace that Glidwell sells for 4x the cost!

Order extra elements at same time. Small furnace is around $2500 or so, I paid around $5k for my 600lb Monster furnace that uses 60amps shipped to me with custom colors and extra elements!

I love it! I love them both!

 

[Drizzt]

Thanks , I will contact them first thing tomorrow morning . Which model is the little one you have ?

 

[DMC]

not the smallest front loading, but the next size up.

We beat the 5hit out of it everyday for years. I have replaced the door insulation because we open it too hot, and it cracks.

They will make you anything you want.....FAST.

 

[Drizzt]

That's great ! I will definitely contact them . Thanks a lot !!!

 

[YMS96]

brofurnace.com



This company makes the same furnace that Glidwell sells for 4x the cost!

The last Glidewell ZR furnace we bought broke in shipping (also heard of other people having this same issue). The quality on those things WAS terrible, not sure if it's changed ??

 

[DMC]

All Furnace insulation is made of same thing.

Fragile!

I never had issues with shipping from China, except broken elements One time.

 

[ParkwayDental]

All Furnace insulation is made of same thing.

Fragile!

I never had issues with shipping from China, except broken elements One time.

Why would you buy from China? Why not spend the money here in the US and help our Country instead of theirs!!!

 

[GeneNY]

link does not work

 

[DMC]

Why would you buy from China? Why not spend the money here in the US and help our Country instead of theirs!!!

ahhh, because there are not US Furnace manufactures. That's my first reason off the top of my head?

My little furnace was $2k, and my BIG furnace was under $5000. If you have extra money to throw away for chits and giggles....I'll take some!

www.brofurnace.com

 

[AGV]

Scott:

I'm interested in the smallest one. I have sent e-mails to the factory but i'm not sure if I have explained or misunderstood. I requiere your kindness to tell me how many programs has this furnace, and the ease to change the element, because I supose there's no option to send it back to the factory to repair. Thanks.

 

[DMC]

One Program, I think?

I never thought about making a second? Maybe it is possible. I will check.

Elements can be swapped in a few minutes. I have done this in the middle of a cycle!!

Using Multi-meter to find the culprit, then pulling it out HOT and throwing another down in there, or even using jumpers to skip that element and just finish on Three elements!

It worked many times. LOL

 

[ice_pascu]

XD-1700M Muffle Furnace
Main Specification:
Chamber size 200x200x200mm （Width x Height x Depth)
Max. temperature 1700 oC
Working temperature 1600 oC
Temperature control PID automatic control via current limiting phase angle fired thyristor with 30 steps programmable
Heating rate 0-15 oC /min
Thermocouple B type
Temperature accuracy +/- 1 oC
Heating element Brother-1800 type MoSi2 Heating element
Furnace structure Double layer steel casing with dual cooling fan, to ensure surface temperature below 50C.
Furnace liner 1800C grade fiber alumina refractory liner
Working voltage 230V 50HZ
Max. Power 6.5KW
Unit price US$3850.8 FOB China
Gross weight 195kgs
Air freight to Romania US$1068.3
Payment terms T/T in advance
Delivery time 1 days (in stock)

the price is a bit much,what was your prices?

 

[AGV]

XD-1700M Muffle Furnace
Main Specification:
Chamber size 200x200x200mm （Width x Height x Depth)
Max. temperature 1700 oC
Working temperature 1600 oC
Temperature control PID automatic control via current limiting phase angle fired thyristor with 30 steps programmable
Heating rate 0-15 oC /min
Thermocouple B type
Temperature accuracy +/- 1 oC
Heating element Brother-1800 type MoSi2 Heating element
Furnace structure Double layer steel casing with dual cooling fan, to ensure surface temperature below 50C.
Furnace liner 1800C grade fiber alumina refractory liner
Working voltage 230V 50HZ
Max. Power 6.5KW
Unit price US$3850.8 FOB China
Gross weight 195kgs
Air freight to Romania US$1068.3
Payment terms T/T in advance
Delivery time 1 days (in stock)

the price is a bit much,what was your prices?

That's what I was offered:
XD-1800M muffle furnace Chamber size: 100x100x100mm US$1985/unit

 

[ice_pascu]

ok thank you,i think the chamber size 10cm is a bit small,here may be the price diferente(but 2000$...)i will ask the price for 15cmX

 

[Kam Yu]

Hi guys. I'm also looking for a sintering oven. It will be my first time doing cad/cam in house, so all advice is appreciated. I have a small lab. Currently, it's just 2 of us working, so I don't need anything big. Just want quality sintering, and minimal hassles (I'm sure this is what everybody wants).

Scott, has it been very quick and easy to obtain replacement parts from them? Customer service is good overall? What would be some reasons why I would buy from them as opposed to say, Nabertherm, Dekema, or other units other than the price?