Forums
New posts
Search forums
What's new
New posts
Latest activity
Articles
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Lab talk, the good, the bad, and the ugly
Metal
Straumann milled cocr
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="PDC" data-source="post: 156794" data-attributes="member: 3385"><p>BASIC INFORMATION ON <strong>STRAUMANN® CARES® TOOTH-BORNE PROSTHETIC PROCEDURES</strong></p><p></p><p>Finishing</p><p>coron® Frameworks delivered by Straumann may need to be ground for finishing and adjusting. For successful results the following rules shall be observed:</p><p>ppCoarse and fine, sharp, tungsten carbide cutters shall be used for surfaces to be layered.</p><p>ppThe surface should always be processed in the same direction to avoid overlaps of the material. The finished framework surface shall be sandblasted with a one-way sandblast abrasive Al2O3 with a medium grain size of 125 μm at a maximum pressure of 2 to 3 bar.</p><p>ppThe framework shall be cleaned with a hot steam or with distilled water in an ultrasound bath. Do not immerse coron® Frameworks into a pickling bath.</p></blockquote><p></p>
[QUOTE="PDC, post: 156794, member: 3385"] BASIC INFORMATION ON [B]STRAUMANN® CARES® TOOTH-BORNE PROSTHETIC PROCEDURES[/B] Finishing coron® Frameworks delivered by Straumann may need to be ground for finishing and adjusting. For successful results the following rules shall be observed: ppCoarse and fine, sharp, tungsten carbide cutters shall be used for surfaces to be layered. ppThe surface should always be processed in the same direction to avoid overlaps of the material. The finished framework surface shall be sandblasted with a one-way sandblast abrasive Al2O3 with a medium grain size of 125 μm at a maximum pressure of 2 to 3 bar. ppThe framework shall be cleaned with a hot steam or with distilled water in an ultrasound bath. Do not immerse coron® Frameworks into a pickling bath. [/QUOTE]
Insert quotes…
Verification
Who makes the popular shade guide?
Post reply
Forums
Lab talk, the good, the bad, and the ugly
Metal
Straumann milled cocr
Top
Bottom