implant components

M

madsam64

New Member
Messages
0
Reaction score
0
i tried this a couple years ago, somebody was interested but never got in touch with me. I have a bunch of implant components...
I also have a belle de st claire steamer that i would love to not look at anymore and some other misc things

new
Nobel Biocare Abutment Screw
Nobel Biocare Impression Coping : Open Tray : 3.5mm
Nobel Biocare Impression Coping : Fixture Level Compl : WP
Sulzer Medica 4.0 mm Implant Body Analog
Sulzer Medica 4.0 mm Implant Body Analog
Sulzer Medica 5.0 mm Implant Body Analog
Sulzer Medica 5.0 mm Gold Coping Engaging 1mm Cuff, 6.5 mm Cuff Diameter

Loose:
3i 3mm (i think) ucla abutment (non engaging for bridges) (two of them, one does not have plastic sleave but is still good for full wax custom abutment)
3i 4mm (i think) ucla abutment with plastic sleeve (non engaging for bridges)
6 analogs that look like 3i (cant be sure) of various sizes.
16 or so various impression screws (screw into the implant analog for pouring models) (most are 3i, some i am not sure. i think there are a couple of nobel biocare and likely some sulzer medica)
7 implant analogs (probably suzler medica and nobel biocare) (colored as follows: 2 green, 3 yellow, 1 blue, 1 purple)
 
M

madsam64

New Member
Messages
0
Reaction score
0
just checking to see if the person above got my email... also if the person who contacted me regarding the steamer, if he got my email as well
 
sidesh0wb0b

sidesh0wb0b

Well-Known Member
Donator
Full Member
Messages
5,670
Reaction score
649
just checking to see if the person above got my email... also if the person who contacted me regarding the steamer, if he got my email as well

sorry about the delay! i replied to you
 
Marcusthegladiator CDT

Marcusthegladiator CDT

Well-Known Member
Full Member
Messages
3,094
Reaction score
432
Its hard to sell on this forum if your post is your first ever.
 
Top Bottom