VHF S1 milling machine

3DCAM

3DCAM

Member
Full Member
Messages
18
Reaction score
1
if you're designing in 3shape, tell the software to not use the screw hole that the implant .dme wants to put in. Put your own hole in using the holes and attachments tools. Adjust the length and placement of the hole so that it doesn't penetrate through to the ti base. Leave 0.5mm and grind it out in the green state.
Thanks
 
3DCAM

3DCAM

Member
Full Member
Messages
18
Reaction score
1
My suggestion would be mill it again in wax, if it blows apart, its a machining strategy problem. If so, try milling as crowns with screw access instead of abutment.
I will try them with wax never thought about that. Thanks
 
Sevan P

Sevan P

Well-Known Member
Full Member
Messages
3,386
Reaction score
641
My burs from Henry Schein and I used 1 star and 3 star still failing
Henry schien sierra tools? Nano di or razor sharp?

Sent from my SM-N950U using Tapatalk
 
Top Bottom