Vhf k5 problem, pls help

F

Faisal Sayed

New Member
Messages
2
Reaction score
0
Hi, everyone, i have some problems with machine k5, after starting the job, in first 30% of the job, spindle stop moving but keeps spinning and the software stop responding, what happening
 
Sda36

Sda36

Well-Known Member
Full Member
Messages
1,094
Reaction score
93
Hi, everyone, i have some problems with machine k5, after starting the job, in first 30% of the job, spindle stop moving but keeps spinning and the software stop responding, what happening
Make sure your air pressure is adequate.
 
Sevan P

Sevan P

Well-Known Member
Full Member
Messages
3,415
Reaction score
641
USB Cable most likely, change port or change cable.
 
RDA

RDA

Well-Known Member
Full Member
Messages
942
Reaction score
192
We need to purchase a new vacuum for our VHF K5. The current one is from Quatro, it has served us for the last five years, and is now dying. Any recommendations on what to purchase next?
Will a central vacuum system work with a mill?
 
Last edited:

Similar threads

Top Bottom