Trinia....?

JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
Anyone have any first hand knowledge of Trinia?
380px-Olenoides_typicalis.png


Whoops wrong one, this Trinia:
http://www.trinia.com/
Trinia_family_0315_1a_500px-768x442.jpg


I've been asked about it, and all I know is that the claim that is a do everything material.
Mill RPD frames, Mill definitive crowns, Aunt Millie, it's the Thneed of CAM.
Are there any real world results that anyone has seen?
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
Think it is a PEEK type material.
 
CatamountRob

CatamountRob

Banned Member
Full Member
Messages
7,384
Reaction score
1,531
If it came in bigger blocks you could mill a ski boat or a new tub/shower unit for the Mrs. That's pretty sweet.
 
lcmlabforum

lcmlabforum

Well-Known Member
Full Member
Messages
1,476
Reaction score
160
Personally, my first question would be has it been FDA cleared?
Sorry, that's just me. Have heard very well received in Europe, but
in the US, everything has to clear muster in the legal framework . . .
LCM
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
I'm using it to mill money so I can retire next week.
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
Personally, my first question would be has it been FDA cleared?
Sorry, that's just me. Have heard very well received in Europe, but
in the US, everything has to clear muster in the legal framework . . .
LCM
I was also wondering. They are HQ'd in Boston, and selling in English and German, but don't say if they are FDA or otherwise on their pages...
 
lcmlabforum

lcmlabforum

Well-Known Member
Full Member
Messages
1,476
Reaction score
160
Same sentiments. I am aware they have been around for a while, so I am not on the bleeding edge
of technology . . .
LCM
 
eyeloveteeth

eyeloveteeth

Well-Known Member
Full Member
Messages
2,169
Reaction score
275
i believe Trinia is FDA approved. It is a bit tough to mill, we've done a few cases with LiSi pressed over it - seems ok? Fits were rough, compared to if we milled from pekkton.
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
i believe Trinia is FDA approved. It is a bit tough to mill, we've done a few cases with LiSi pressed over it - seems ok? Fits were rough, compared to if we milled from pekkton.
That's one of the things, with it being fiberglass layers inside, there is going to be some frazzling frayed ends sticking out at the milled face. Just about has to be.
 
Top Bottom