Tips and Tricks for your lab

ps2thtec

ps2thtec

Well-Known Member
Donator
Full Member
Messages
2,485
Reaction score
620
I've been using a BlueBerry to thin my zirconia margins. They work nice but a little pricey . Today I tried one of my Vident flexible diamond disc that I use to use when doing foiled laminates. Remember those ? Anyway , worked great. Used it for the bulk work and then just a little cleanup with a white rubber wheel. I'll have to see how long they last.

These blue ones work great, from Pearson.The large blue wheel for zirc margin finishing. Let the wheel do the work.
Last a long time. The smaller sizes are good too.
 

Attachments

  • 76247717-CBCB-4E01-A05E-7AB55F7534C5.jpeg
    76247717-CBCB-4E01-A05E-7AB55F7534C5.jpeg
    247.3 KB · Views: 208
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
Couldn't find my rubber Barrel polisher mandrel. Anywhere. Grabbed a old fissure burr, ran it in. It works!
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
For sanitation I use a pair surgical sponge holders to open, unwrap and flip prosthesis and impressions as I spray them down with Cavicide.
Then spray them down and when the cases are clean so are they and they get re-hung at the login area.

No affiliation with the ebay person below aside from being a customer. Just easiest place to grab an image.

s-l500.jpg
 
sndmn2

sndmn2

Well-Known Member
Full Member
Messages
1,025
Reaction score
166
There are plenty of glaze liquids out 20180103_154629.jpg there but I have been using this kind of stuff for 30 years..About $14 a pint at the pharmacy.
 
Adi

Adi

Active Member
Full Member
Messages
355
Reaction score
40
There are plenty of glaze liquids out View attachment 28745 there but I have been using this kind of stuff for 30 years..About $14 a pint at the pharmacy.
And it looks like it is the main liquid in modelling liquids, I just wish I could find the formula , what to add to the propolyn glycol to make a good modelling liquid.


Sent from my PadFone T008 using Tapatalk
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
And it looks like it is the main liquid in modelling liquids, I just wish I could find the formula , what to add to the propolyn glycol to make a good modelling liquid.


Sent from my PadFone T008 using Tapatalk
The constituent additives should be listed in the sds, the ratios is what will be rough to get right.
 
Adi

Adi

Active Member
Full Member
Messages
355
Reaction score
40
The constituent additives should be listed in the sds, the ratios is what will be rough to get right.
I'm willing to try, just tell what the additives are?

Sent from my PadFone T008 using Tapatalk
 
Adi

Adi

Active Member
Full Member
Messages
355
Reaction score
40
The best I ever worked with is d.sign.liquid
ddd093982e1699b771cb59cb0d4217e7.jpg


Sent from my PadFone T008 using Tapatalk
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
Easy keep-your-brushes-straight method.
Grab a implant carrier or other plastic tube, super glue it to the side of the small bench use bottle. Insert brush.
And I love this stuff!
20180516_123054[1].jpg
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
Takes a little while to train them and you have to watch your fingers.
 
rkm rdt

rkm rdt

Well-Known Member
Full Member
Messages
21,405
Reaction score
3,288
The rubber works most of the time.
 

Similar threads

Restorationlab
Replies
16
Views
870
JonnyLathe
T
Replies
11
Views
352
tuyere
T
JKraver
Replies
9
Views
725
Contraluz
Contraluz
vladpereverzyev
Replies
17
Views
2K
DentalArt
DentalArt
T
Replies
20
Views
1K
Laura Feng
L
Top Bottom