Tips and Tricks for your lab

ps2thtec

ps2thtec

Well-Known Member
Donator
Full Member
Ratings
920 11
I've been using a BlueBerry to thin my zirconia margins. They work nice but a little pricey . Today I tried one of my Vident flexible diamond disc that I use to use when doing foiled laminates. Remember those ? Anyway , worked great. Used it for the bulk work and then just a little cleanup with a white rubber wheel. I'll have to see how long they last.
These blue ones work great, from Pearson.The large blue wheel for zirc margin finishing. Let the wheel do the work.
Last a long time. The smaller sizes are good too.
 

Attachments

JMN

JMN

Christian Member
Staff member
Donator
Full Member
Ratings
4,265 59
Couldn't find my rubber Barrel polisher mandrel. Anywhere. Grabbed a old fissure burr, ran it in. It works!
 
JMN

JMN

Christian Member
Staff member
Donator
Full Member
Ratings
4,265 59
For sanitation I use a pair surgical sponge holders to open, unwrap and flip prosthesis and impressions as I spray them down with Cavicide.
Then spray them down and when the cases are clean so are they and they get re-hung at the login area.

No affiliation with the ebay person below aside from being a customer. Just easiest place to grab an image.

 
sndmn2

sndmn2

Well-Known Member
Full Member
Ratings
289 2
There are plenty of glaze liquids out 20180103_154629.jpg there but I have been using this kind of stuff for 30 years..About $14 a pint at the pharmacy.
 
Adi

Adi

Active Member
Full Member
Ratings
46 4
There are plenty of glaze liquids out View attachment 28745 there but I have been using this kind of stuff for 30 years..About $14 a pint at the pharmacy.
And it looks like it is the main liquid in modelling liquids, I just wish I could find the formula , what to add to the propolyn glycol to make a good modelling liquid.


Sent from my PadFone T008 using Tapatalk
 
JMN

JMN

Christian Member
Staff member
Donator
Full Member
Ratings
4,265 59
And it looks like it is the main liquid in modelling liquids, I just wish I could find the formula , what to add to the propolyn glycol to make a good modelling liquid.


Sent from my PadFone T008 using Tapatalk
The constituent additives should be listed in the sds, the ratios is what will be rough to get right.
 
Adi

Adi

Active Member
Full Member
Ratings
46 4
The constituent additives should be listed in the sds, the ratios is what will be rough to get right.
I'm willing to try, just tell what the additives are?

Sent from my PadFone T008 using Tapatalk
 
Adi

Adi

Active Member
Full Member
Ratings
46 4
The best I ever worked with is d.sign.liquid


Sent from my PadFone T008 using Tapatalk
 
JMN

JMN

Christian Member
Staff member
Donator
Full Member
Ratings
4,265 59
Easy keep-your-brushes-straight method.
Grab a implant carrier or other plastic tube, super glue it to the side of the small bench use bottle. Insert brush.
And I love this stuff!
20180516_123054[1].jpg
 
Guest Room
Help Users
  • No one is chatting at the moment.
  • Chat Bot:
    Room has been pruned!
    Chat Bot: Room has been pruned!