doflab0070

doflab0070

Active Member
Sponsors
Full Member
Messages
109
Reaction score
7


The success of an implant would depend on the choice of an abutment or a design of an abutment.
5-axis milling perfectly reproduces the custom abutment.

Edwin is demonstrating the difference between the abutment milled on 4-axis and 5-axis.


<Click the below image to watch the video>
#6 The Custom Abutment Milled with 5-Axis_1.jpg


If you have any questions, please contact on [email protected]
Visit our website https://doflab.com/
 

Similar threads

Top Bottom