Taking Questions...

B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
For Alien HT Zirconia what are you finding to be the best sintering cycle? have 4 steps in my furnace
 
AlienMilling

AlienMilling

Active Member
Sponsors
Full Member
Messages
276
Reaction score
51
We currently recommend 3 cycles which are posted on the site.
We will be posting a Fast Sinter Cycle soon.
Have a look here.
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
So i am new to all this. Could you tell me what my sintering screen would look like with the below pics? (disreguard the current #'s, that's a different saved file on the furnace)
 

Attachments

  • image0.jpeg
    image0.jpeg
    50.2 KB · Views: 11
  • image2.jpeg
    image2.jpeg
    34.3 KB · Views: 10
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633
On your Mihm...
10 100 0
10 300 0
10 1540 150
10 900 10
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
can you explain why the 100 and 300? i dont get how to read this chart...
 
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633
bottom line, 10 degrees a minute to 900. hold 10 minutes
next line up, 10 /minute to 1540 hold 150 minutes
the top 2 lines are cooling. You could just enter 10 (the rate of cool) down to what ever you want, or the oven allows.
Could be...
0 000 0
10 250 0
10 1540 150
10 900 10


The top 2 lines dont have to both be cooling. You could have 3 lines of heating and one line of cooling.
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
whats the step 3 (214 min) thats where im confused... but i might just be an idiot
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
3rd down under time
 

Attachments

  • image2.jpeg
    image2.jpeg
    34.3 KB · Views: 7
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633
I dont know what that oven is.
Is that a programmable hold ime or just showing the total time that step or all previous steps will take?
You just want to heat up at 10/minute to 900 and hold 10 minutes.
Then continue t heat at 10/minute to the high temp 1540 and hold for 150 minutes.
Now cool at 10/minute down to room temp or what ever...200, 250
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
no its a sintering suggestion for zirconia puck
 
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633
This is the Mihm screen...

mihm.jpg

What is the other pic from? I thought that was a screen from a different oven. If thats aliens schedule, just enter what I showed you.
 
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633
Ok...I just looked at Aliens schedule.

They want 3 degrees a minute from 900 to 1540. That will take 214 minutes.
Sorry for any confusion
 
B

Bzydo23

Member
Full Member
Messages
84
Reaction score
0
yea i was just showing the "Group" what furnace i had, then aliens perimeters. Thanks for the help! Next rounds on me:)
 

Similar threads

Top Bottom