STL to Cerec conversion

[shong43826]

Hi, is it possible to convert STL file to Cerec to mill using Cerec mill?

thanks in advance!

 

[DanD]

The fact that the cerec Mill doesn't Mill stl's is flabbergasting.

 

[sprange]

No need to convert the STL...Cerec Cam accepts STLs as does Inlab. I have played around with it and my MCXL yielded some screw retained implant crowns that fit the tibase very accurately.

 

[bigbrush]

Works since CAD 15.
Import stl amd mill with CAM 15 or higher.
For more information please send pm.

 

[basler]

old tread but similar question ....
would I be able to mill from a .stl on a cerec compact ?
Inlab 15 would work I assume?
I have old compact that hasn`t been dusted in years lol

 

[bigbrush]

INlab Cad works if you do construction of your *stl scans in Inlab Cad15.
For monly milling cdt-converter is the only way,than milling in Inlab Vers 3.xx .

 

[dr.naveen]

I have CEREC SW 5.2, im designing using exocad.. is there any way to import the stl directly in CEREC SW for milling. i dont have inlab cam

 

[CoolHandLuke]

 

[drmikezhou]

I have CEREC SW 5.2, im designing using exocad.. is there any way to import the stl directly in CEREC SW for milling. i dont have inlab cam

No, you need Inlab CAM. And if you're milling on Primemill, you need Inlab CAM 22. No otherway around this. I think with DS Core, the CAM will be in the cloud as a subscription service, which should also allow you to mill any design STL on a CEREC mill.