STL of a Shade Guide

zero_zero

zero_zero

Well-Known Member
Full Member
Messages
6,293
Reaction score
1,397
It was designed back then, and now the file is prolly lost...
 
HonestAbe

HonestAbe

Member
Full Member
Messages
367
Reaction score
0
Where can I download the STL for the holder?
I might mess around with making one this weekend. I'd take it into meshmixer, overlap it with a primitive like a cylinder that's a larger diameter than the hole, then boolean subtract it to form a post that should fit tight. Maybe scale it down every so slightly so it's not too tight. Then you could 3d print those if you really wanted to get fancy with it. Might be funny to make it fit the Vita shade guide holder....
 
C

cosmicsport

Member
Full Member
Messages
42
Reaction score
0
I made my own one. You are welcome!
File is too large so I had to split it and zip it again so the server is accepting it.
 

Attachments

  • Shadetap_Real_with_Pin_12mm_height.stl
    5 MB · Views: 130
  • ShadeTapHolder Solid STL1.zip.zip
    9.4 MB · Views: 134
  • ShadeTapHolder Solid STL2.zip.zip
    9.5 MB · Views: 115
  • ShadeTapHolder Solid STL3.zip.zip
    1.3 MB · Views: 116
Top Bottom