STL of a Shade Guide

Hourglass716

Hourglass716

Member
Full Member
Messages
29
Reaction score
2
Does anybody have an STL file for a shade guide?

I want to mill my own shade guide from a preshaded zirconia.

An actual zirconia shade guide will be more accurate than the plastic VITA shade guide.

Thanks a bunch!
 
sidesh0wb0b

sidesh0wb0b

Well-Known Member
Donator
Full Member
Messages
5,695
Reaction score
649
Does anybody have an STL file for a shade guide?

I want to mill my own shade guide from a preshaded zirconia.

An actual zirconia shade guide will be more accurate than the plastic VITA shade guide.

Thanks a bunch!
thats an excellent idea!
 
F

FASTFNGR

Active Member
Full Member
Messages
541
Reaction score
5
Does anybody have an STL file for a shade guide?

I want to mill my own shade guide from a preshaded zirconia.

An actual zirconia shade guide will be more accurate than the plastic VITA shade guide.

Thanks a bunch!
Mill tooth #8 or #9 from the zirconia that you use and make all the shades. That is the best way because because every manufacturer has a bit different shading.
 
R

rookiee

Active Member
Full Member
Messages
199
Reaction score
12
Guys, where to get holder for these samples?
 
sidesh0wb0b

sidesh0wb0b

Well-Known Member
Donator
Full Member
Messages
5,695
Reaction score
649
If there's enough interest (and if I get some free time :banghead: ) ... you could have your very own printable custom shade tab kit even with your logo embossed in the base...Deal

View attachment 33950
OH SNAP! youre hired!
prob shouldnt say Vita though, they might frown upon it haha
 
Top Bottom