So Im testing out a new printer...

Sda36

Sda36

Well-Known Member
Full Member
Messages
1,094
Reaction score
93
That is Monocure 3d rapid whith 50 micron layer height, got some Anycubic and Makerjuice SF resins as well to try... I just need longer days Banghead
Thanks! I can imagine, quite a jungle in this sector:):):):):):deadhorse:
 
zero_zero

zero_zero

Well-Known Member
Full Member
Messages
6,293
Reaction score
1,397
Anycubic grey resin, same results as the Monocure 3D Rapid, 50 micron layer height... happy, happy 😁
32369 32370 32371
I've built and an adapter for the Fromlabs Wash to accept the Phrozen build plate.
 
S

sirmorty

Active Member
Full Member
Messages
610
Reaction score
37
I got ask why you are printing them with all those supports?

Why not just put the models flat on the build platform?
 
cadfan

cadfan

Well-Known Member
Full Member
Messages
1,519
Reaction score
207
Thanks much !

Any issues with me putting the stl file in the resources section?

Edit:touchtyping on a tablet again.
Always a pleasure i have no problems they are part of 3 D systems print software which is free as viewer and i hope its ok for them maybe Glenn Kennedy could chime in if not. So special thanks to 3 d systems !! by the way they have some good print videos .
 
PCDL

PCDL

Active Member
Full Member
Messages
411
Reaction score
46
It would be great if we could hear from @Glenn Kennedy on the NextDent resins as well! Im hearing great things about them, and I would love to see if they would give us some more insight into the proper printing profiles.
 

Similar threads

Top Bottom