sintering furnace has cut off electricity

M

Monica Ragaie Basta

Member
Full Member
Messages
11
Reaction score
0
the sintering furnace has cut off electricity last night during the long cycle 12 hours , don't know at what time it happened
i got error for electricity cut off
the zirconium is not in the green state
mihm voght furnace
can i work on it ?
 
F

FASTFNGR

Active Member
Full Member
Messages
506
Reaction score
5
the sintering furnace has cut off electricity last night during the long cycle 12 hours , don't know at what time it happened
i got error for electricity cut off
the zirconium is not in the green state
mihm voght furnace
can i work on it ?
Some furnaces will continue the cycle after the electricity comes back. I am not familiar with your oven but mine last week had the same issue? The color was ok and we finished it and glaze it afterwards and all was good.
 
Contraluz

Contraluz

Well-Known Member
Donator
Full Member
Messages
1,883
Reaction score
275
the sintering furnace has cut off electricity last night during the long cycle 12 hours , don't know at what time it happened
i got error for electricity cut off
the zirconium is not in the green state
mihm voght furnace
can i work on it ?
Compre it with your regularly sintered crowns. If they look like your everyday crowns, I would go with it.

However (!!),if I’d had a full arch or bigger bridge cooking, I’d probably redo the case. Especially if the firing cycle is one of the long ones.
 
Toothman19

Toothman19

Active Member
Full Member
Messages
689
Reaction score
77
Same thing happened to me Wednesday night. Crowns came out terrible after restarting the program
 

Similar threads

Top Bottom