Hello, after 45 years it's time to call it a career. All of the prices include shipping, so keep that in mind
All payments are to be made by a banks Cashiers check, if I know you from experience on this forum a business check is okay, or by PayPal.
*Dry Mill and Programill suction price reduced to $13,000.
First off, a Programill Dry Mill with RFID reader, suction unit and PC. It will also include 2 new filters for the Programill suction unit, a new collet and some new tools for the mill, and a medium small airline dryer right next to the mill. I also had a bigger air line dryer right after the compressor's twin airline dryers so it's been taken care of in that way. I will deliver it in my Honda CRV within the states of MN, N.D., S.D., Iowa, Wisconsin and help set it up, and go over some tips to get you started. Otherwise, it will be shipped by a bigger shipping carrier. This unit was one of the first or 2nd units sold in the US, so there was no maintenance plan, service plan that I had to buy.
BUT, you need to call your rep to find out what you would need to do if you wanted a yearly service contract, and if they would let you buy repair service as needed, ala carte or not, as my situation (new item for Ivoclar) was so new to them, they didn't know what to do, regarding a service contract.. I bought the mill on June 29th, 2021.
The Programill suction unit is this one (link). I can PM you a photo of it, as I ran out of images I was allowed to post in this thread. Again, it will come with 2 new filters, the Pre filter, and the HEPA filter.
https://www.ivoclar.com/en_li/products/digital-equipment/programill-suction-unit
I'm a one man lab, so it wasn't heavy duty use, but normal use. I did also split some things up with the Mini Mill (milling wax). The CAM version is the Advanced CAM 4.4.13.0. The CNC is v7.08.00.P3. One of the main reason I bought it, let alone to be able to mill in house, is that I could use the compressor I already had, compared to needing to upgrade that for a Programill PM5. Asking price $14,000. Spindle hours are shown on the last image. It is the original spindle, it has never needed calibration and is built like a tank.
View attachment 45704 View attachment 45705 View attachment 45706 View attachment 45707 View attachment 45708
2-S1 Sinter furnaces. One is a bit older, but I recently replaced the 2 front elements, and will include a new 2 tier Dostro tray. It has 8,474 firing hours and 62,619 operating hours. I'm asking $4,000. which includes shipping in the original box. The other one is newer, and will have the single tray. It has 5687 firing hours and 45,577 operating hours. I'm asking $4,500. which includes shipping in the original box. Both will include the calibration tool. Both are on v6.01
View attachment 45710 View attachment 45711
I'm at my image posting limit, so if you are interested in any of the following, I can PM you some images, otherwise I'll start another thread in 2 weeks (forum rules) but I also have:
- emax press ingots are $90. per 5 piece tube, and $70. per 4 piece tube. Includes shipping. Full tubes of emax press=s MT's A3. LT's BL1 and BL4. HT's (work great for posterior monolithic) BL4, A2, A3 (2 tubes), C1, C2./ Tubes with 4 ingots for 70. each =s LT BL3, LT B1, LT B2, LT D2, HT A3.5, HT C1, MT A1. They need to be orders of 2 or more to help offset the free shipping.
*I have 71 lab pans in differing colors, for ~$1.50 each. But I will only sell the whole lot together, as I need to cover shipping costs due to the low cost of the pans, and of the size of the box. There are 8 Yellow, 7 White, 16 Green, 22 Blue and 18 Red pans. A lot of them have my lab initials on the part where the script is clipped in, so it would cover it. On some cases, I just delivered them in the pans when there was to much stuff to put in the boxes and wanted to make sure I got them back. Asking $100.
*Renfert Bi Pins short, metal sleeves. There are about 400-500 left from the box of 1,000. I had ordered. I can PM you a picture if needed. Asking $75. includes shipping.
*I have a Pre programed Canon G16 camera with diffuser for patient photos, color correct monitor for viewing those photos, new electric straight handpiece, lab pans, etc.
More equipment can be found here:
This is a follow up thread to this one, to help keep things separate and less confusing, as it includes more stuff.
3Shape E1 scanner which could be used as a back up scanner for $2,000. which includes shipping.
Wieland Mini Mill, Windows 7 PC and Quatro suction unit. I have not had any issues with the mill, it mills great, but it is the original spindle. And the Quatro suction needs to be manually turned on and off with the unit. Asking $3,800. shipping included. Extra grommets, touch...
CHeers
