Pro 4K Dentamodel issues

M

mso101

New Member
Full Member
Messages
6
Reaction score
0
Looking for some insite... for those with an Asiga Pro4K 80UV what are your dentamodel ini settings and support setting? Im using the dentamodel multirange.ini files with the default settings except I keep the temperature on at a constant 30C and my model prints wont get passed the burn in layer for some reason. It prints the burn in layer then the rest of the models get stuck to the tray and I'm just left with the burn in layer on the build platform.
 
tehnik

tehnik

Active Member
Full Member
Messages
314
Reaction score
12
Dentamodel is not working correctly on 4K pro. Even if you get it to print, there are small bubbles on the model surface. Asiga itself told to use other material for models.
 
M

mso101

New Member
Full Member
Messages
6
Reaction score
0
Dentamodel is not working correctly on 4K pro. Even if you get it to print, there are small bubbles on the model surface. Asiga itself told to use other material for models.
What other model resins would work or which one do you reccomend ? I would really like to print models on our 4K because the Pro Max can't put out the quantity we need. I've seen the Keystone model resin.. is that one any good or does it work ? I'm open to any recommendations.
 
2000markpeters

2000markpeters

Active Member
Full Member
Messages
423
Reaction score
79
we print at 50 and 75 micrn levels. No issues
 
G

grantoz

Well-Known Member
Full Member
Messages
1,793
Reaction score
366
all the people i know use dentamodel no probs
 
M

mso101

New Member
Full Member
Messages
6
Reaction score
0
I use 10 bottles a week of Denta Model by Asiga. Works like a charm on the Pro4K
you do use all the default settings for the ini file and supports? if not, do you mind sharing your dentamodel .ini file and supports settings? id really appreciate it!
 
tehnik

tehnik

Active Member
Full Member
Messages
314
Reaction score
12
I am using Keystone Keymodel Ultra with settings from Asiga homepage. No bubbles etc.
 

Similar threads

Top Bottom