Printing ceramics

  • Thread starter jesusdesinger10
  • Start date
J

jesusdesinger10

Member
Full Member
Messages
35
Reaction score
0
Anyone printing crown and bridge yet? If so, was the outcome successful and what printer do you use/material. Cheers!
 
J

jesusdesinger10

Member
Full Member
Messages
35
Reaction score
0
printing Pac-dent Rodin Sculpture on an Ackuretta SOL
very nice material, follow the guidelines and it processes well
very cool....Do you know what printers it's compatible with? We are using an Asiga max.
 
J

jesusdesinger10

Member
Full Member
Messages
35
Reaction score
0
That is so cool. Wow . I will be calling them. Thank you!
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Full Member
Messages
1,221
Reaction score
199
Shofu Lite Art and Ceramage for color and layering..
also, Pac-dent will have color and glaze out in jan/feb..

IMG_6967.jpeg

optiglaze and fine grain stains are used here

IMG_7028.jpeg
 
GG - J

GG - J

Active Member
Full Member
Messages
289
Reaction score
14
any experience using opti- print ?
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Full Member
Messages
1,221
Reaction score
199
no, is that a resin? just did a quick search
 
J

jesusdesinger10

Member
Full Member
Messages
35
Reaction score
0
Is this a light cure process or do you do you have to sinter? Very interested in the workflow.
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Full Member
Messages
1,221
Reaction score
199
all light cure....
it has a 20 min cure..
I'm working with it quite a bit as well as talking with their testing lab..

initially, I was doing a recoat at the 10 min mark.. and may still stick to that..

IMG_7004.jpeg
cure for 10 more

IMG_6958.jpeg

cure for another 15 on the 20 cycle
de-sprue and polish with wow, or glaze with any light cure..
tonight I ordered cremage incisal to work with, I almost ordered the LightArt kit as well but am trying to "hold out" for obvious reasons..

the implant temp above was bonded into place after simply coring out the crown and bonding it back in with liquid sculpture worked awesome.. work with it at the half way mark.. run it for another 20.. IMO, this would be the way to bond in a full arch

from what I understand, Pac-Dent is working on a stain/glaze kit to apply at the half way mark.. I am very interested in this for obvious reasons, the main reason being, this stuff is awesome....

and.. this is the perfect material to print the ruins of the lost city of Atlantis, drop it in an epoxy resin table and light thru the marble from underneath... that'll happen soon.
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Full Member
Messages
1,221
Reaction score
199
yes it is... this needs to hit the hobby market. stand by.. more to come

IMG_7104.jpeg

Atlas is about to have a Molten Planet Earth flowing down him

IMG_7105.jpeg

I scrape my plate resin to pour into silicone molds...
I've been waiting for something like this for a long time for applications outside of dental
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Full Member
Messages
1,221
Reaction score
199
IMG_7111.jpeg

IMG_7113.jpeg

using Curo for models.. love it, but going to give Argen Grey a try. about to order..
 
Top Bottom