Print model holes from multidie scans - exocad

Slimboyphat

Slimboyphat

Member
Full Member
Messages
37
Reaction score
0
I'm curious if anyone has a solution to create clean printable models after replacing preps on original scan with multidie scans 1684339768075.png 1684339801036.png
 
S

sirmorty

Active Member
Full Member
Messages
610
Reaction score
37
Did you try running it through meshmixer? or another model design software? Like medit link?
 
Last edited:
Slimboyphat

Slimboyphat

Member
Full Member
Messages
37
Reaction score
0
Did you try running it through meshmixer? or another model design software? Like medit link?
ill give that a shot here pretty soon. ive only attempted with exocad so far
 
Toothman19

Toothman19

Active Member
Full Member
Messages
689
Reaction score
77
Like this?
 

Attachments

  • 20230517-170714-Default-tempmodel-IDK-0.png
    20230517-170714-Default-tempmodel-IDK-0.png
    620.7 KB · Views: 10
  • 20230517-170717-Default-tempmodel-IDK-1.png
    20230517-170717-Default-tempmodel-IDK-1.png
    642.5 KB · Views: 10
Slimboyphat

Slimboyphat

Member
Full Member
Messages
37
Reaction score
0
Like this?
I'm wanting to print the design on the model to use for study and for the dr to create temps. So enabling ditching disables the ability to print with the design
 
PRO ARTS DL

PRO ARTS DL

Active Member
Full Member
Messages
240
Reaction score
59
You'll definetly need meshmixer for this.

Save your design and current model as 1 file and then on meshmixer create a solid. Meshmixer will create a new mesh which combines your design and current model without the holes.
 
Slimboyphat

Slimboyphat

Member
Full Member
Messages
37
Reaction score
0
You'll definetly need meshmixer for this.

Save your design and current model as 1 file and then on meshmixer create a solid. Meshmixer will create a new mesh which combines your design and current model without the holes.
ahh ok I was just playing with meshmixer this morning and started thinking in that direction. thanks for the confirmation on that
 
Toothman19

Toothman19

Active Member
Full Member
Messages
689
Reaction score
77
I'm wanting to print the design on the model to use for study and for the dr to create temps. So enabling ditching disables the ability to print with the design
Use the mock up feature and then print digital wax up
 

Similar threads

Top Bottom