Pressed Ingots

Martin Dunwoody

Martin Dunwoody

New Member
Messages
1
Reaction score
0
Wondering if anyone can help? I’ve got a Touch&Press Recently the piston is pudding the plunger too deep into invested ring and splitting it apart
Any help would be appreciated
🙏
Thanks in advance.
 
ps2thtec

ps2thtec

Well-Known Member
Donator
Full Member
Messages
2,485
Reaction score
620
I’ve never used that oven but can only think of the obvious, and you may have thought
them also.
This is an air driven plunger? Has the pressure changed on the regulator?
Have you changed your investment?

Good luck solving your problem.
 
Gru

Gru

Well-Known Member
Full Member
Messages
1,707
Reaction score
305
Wondering if anyone can help? I’ve got a Touch&Press Recently the piston is pudding the plunger too deep into invested ring and splitting it apart
Any help would be appreciated
🙏
Thanks in advance.
Please take a pic of the plunger end. It may have vaporized ceramic built up on it. I've repaired so many of these at a previous employer I may be of use to you.
 
F

FASTFNGR

Active Member
Full Member
Messages
506
Reaction score
5
Wondering if anyone can help? I’ve got a Touch&Press Recently the piston is pudding the plunger too deep into invested ring and splitting it apart
Any help would be appreciated
🙏
Thanks in advance.
Try to reduce the air pressure on the side of your furnace and see if that works.
 
Top Bottom