Post curing in otoflash

tehnik

tehnik

Active Member
Full Member
Hi!


Is there any information about post curing times etc of different print materials? I am using asiga dentamodel and dentagum, formlabs clear lt and dental sg.
 
JMN

JMN

Christian Member
Staff member
Full Member
Hi!


Is there any information about post curing times etc of different print materials? I am using asiga dentamodel and dentagum, formlabs clear lt and dental sg.
This is really variable as each material has differing opacity.

The curing units each have their own issues. Light output wattage, mirror placement or lack of mirrors, distance of cured object from light source(mirros extend light sources, they are not light sources).

You'll find a good general guess is 10-25 minutes and then need to fiddle to see what works best for your setup's combination of materials, equipment, and technique to make it least interferring for your lab's workflow. Each l/c material even in the same brand will have slightly different cure times even with the exact same equipment due to different dyes and the differences in material characteristics.
 
Private conversations
Help Users
    You haven't joined any rooms.
    Top Bottom