Origin Coloring liquids.

sndmn2

sndmn2

Well-Known Member
Full Member
They come in three different strengths, per say. In the Vita shades . I was wondering , You guys who use it do you have a preference ?
 
Car 54

Car 54

Well-Known Member
Donator
Full Member
70 is my all around favorite.
It's just that is what I started out with, and have all my shades dialed in with.
 
Last edited:
Car 54

Car 54

Well-Known Member
Donator
Full Member
Just ordered the complete 3 D shade kit, 50 ml bottles.
You may find that they're a little light shade wise. Had you tried any individual shades?
 
OP
sndmn2

sndmn2

Well-Known Member
Full Member
I tried some on a case last night. 3R1.5 I used the pontic inhibiter, Inc. 20. I have done a couple test firings but this is the first case. I will post results. Pleas be kind , I'm no John Wilson. 😀
 
Sda36

Sda36

Active Member
Full Member
You may find that they're a little light shade wise. Had you tried any individual shades?
No, not yet. Decided to get this kit for range, needed to re order from original origin kit that I've used the last 4 years. Mainly needed A2 but 2M2 will be fine for that. Was also using Level 80 strength, last thing I want is too strong a chroma. Also depends on Zr used, presently Zolid white.
 
OP
sndmn2

sndmn2

Well-Known Member
Full Member
Holy skyscraper Batman..18mm centals..but anyways..as it came from the oven..this is Argen white with the Origin liquids. Shade didnt come bad..pontics turned out lighter..13 hour sinter..I dont know if that was necessary or not..could I have gotten away with a shorter cycle? Tough to realy see on cell phone camera..
 

Attachments

Sda36

Sda36

Active Member
Full Member
Holy skyscraper Batman..18mm centals..but anyways..as it came from the oven..this is Argen white with the Origin liquids. Shade didnt come bad..pontics turned out lighter..13 hour sinter..I dont know if that was necessary or not..could I have gotten away with a shorter cycle? Tough to realy see on cell phone camera..
Looks good, value seems great but like you said cell phone in control. Nice work!!
 
Sda36

Sda36

Active Member
Full Member
Looks good, value seems great but like you said cell phone in control. Nice work!!
My goal is to stain, sinter, & glaze with possibly only InSync glaze (Miyo) and some minute characteristions, magic!
 
Guest Room
Help Users
  • No one is chatting at the moment.
  • Chat Bot:
    Room has been pruned!
    Chat Bot: Room has been pruned!
    Top Bottom