Next dent ortho clear resin

V

vkalscheur

Member
Full Member
Messages
5
Reaction score
0
Printing bite splints.
After curing the splints are turning yellow.
Anyone have experience with this material?
What is your process?
I have a dreve pcu led cure oven. What are your parameters for curing cycle?
 
JMN

JMN

Christian Member
Full Member
Messages
12,205
Reaction score
1,884
B

basler

Member
Full Member
Messages
74
Reaction score
2
Printing bite splints.
After curing the splints are turning yellow.
Anyone have experience with this material?
What is your process?
I have a dreve pcu led cure oven. What are your parameters for curing cycle?

Cure them in glicerin


Sent from my iPhone using Tapatalk
 
RCKSTR

RCKSTR

Well-Known Member
Full Member
Messages
463
Reaction score
128
We found if they are in the alcohol bath (clean fresh alcohol only) for more than 10 mins or the UV light for more than 15 mins they discolor. Some discoloration is normal, they never are "crystal clear" like fresh out of the printer after they have been cured.
 
kostisg

kostisg

Member
Full Member
Messages
21
Reaction score
7
I think the best is to post cure with vacuum... And of not have with glycerin in that way become a trully class ii material

Στάλθηκε από το CLT-L29 μου χρησιμοποιώντας Tapatalk
 
V

vkalscheur

Member
Full Member
Messages
5
Reaction score
0
we have found that if we rinse with ipa it turns the part hazy. and if we cure with light it turns the part yellow.
 
Top Bottom