neodent

A

aqdental

Active Member
Full Member
Messages
299
Reaction score
48
Buongiorno
just received a case with 2 neodent 4.1 mm . Are they compatible with branemark RP ? I think that is 4.0 mm. Thank you
 
Jo Chen

Jo Chen

Well-Known Member
Full Member
Messages
537
Reaction score
105
As far as I know no. At least in the US. Neodent comes in two flavors; CM cone Morse and GM grand Morse. They are not compatible with each other and I don’t think any compatibility exists with any other implant system. Get the surgical report to determine what flavor you need to order through Straumann
 
A

aqdental

Active Member
Full Member
Messages
299
Reaction score
48
That's what they gave me. External hex. 32661
 
2000markpeters

2000markpeters

Active Member
Full Member
Messages
472
Reaction score
79
Neodent has its own parts. It is not a bad system if what you mostly do is tibase type work
 
I

implanttek

Member
Messages
2
Reaction score
0
The newest platform is GM (Grand morse). but the one you have right now should be compatible w/ Nobel Branemark RP External Hex 4.1. Its their version of an external hex connection.
 
J

JustDavid

Member
Full Member
Messages
32
Reaction score
5
Looks like GM Helix, external Hex.
Here are the latest libraries :

Is not so bad to work with.
Just put a UCLA on top and cast in non precious for screw retained.

I hope you can get it stored.
Ask your rep for a working protocol should make your life a little easier to get what you need.

Regarding compatibility, never heard of any just yet but do try and see.

Good luck with the case.
Cheers
 
Last edited:
DESS-USA

DESS-USA

Active Member
Full Member
Messages
222
Reaction score
63
if it is a branemark, biohorizons, or 3i osseotite external hex compatible then I have the parts...you can use this chart to measure the hex width and height.
You can order the parts 24 hours a day at www.dess-usa.com

32681
 
Jason D

Jason D

Well-Known Member
Full Member
Messages
505
Reaction score
180
Lol
Is not so bad to work with.
Just put a UCLA on top and cast in non precious for screw retained.


Lol that IS “bad to work with”...UCLA should be in a museum, only referred to as “a time when we didn’t have any alternatives, until technology finally came to our profession.”

😜
 
J

JustDavid

Member
Full Member
Messages
32
Reaction score
5
Lol
Lol that IS “bad to work with”...UCLA should be in a museum, only referred to as “a time when we didn’t have any alternatives, until technology finally came to our profession.”

😜
Fair enough, I took implants like Adin etc as benchmark for bad.
A few month back there didn't seem to be any solutions.. All you got was but the implants are cheap can you not try to make something work?

You would be surprised how much ucla is being done here in the UK.

Cheers
 
A

aqdental

Active Member
Full Member
Messages
299
Reaction score
48
Thanks everyone, branemark RP fits perfect.
 

Similar threads

G.YOUNG.91
Replies
0
Views
192
G.YOUNG.91
G.YOUNG.91
M
Replies
9
Views
211
DigiSculpt Design Center
DigiSculpt Design Center
millennium
Replies
4
Views
211
millennium
millennium
Top Bottom