Need help with STL files for an implant case (zimmer scan bodies)

Contraluz

Contraluz

Well-Known Member
Donator
Full Member
Messages
1,881
Reaction score
275
After going through the corporate options with no luck (Whip mix, Argen and Core3d),I turn here, before telling my client to re-scan the case.

I have STL files for an Implant case with two zimmer OEM scan bodies. I don't have the open model builder, only the one for 3shape cases. So, would anybody here be able to help me to convert these IOS stl files into actual model files, with analogs etc, off which I then can get real models printed?

Thanks in advance

M
 
Sevan P

Sevan P

Well-Known Member
Full Member
Messages
3,413
Reaction score
641
Do you have the correct library with dim's? If so I will run it through model builder and give you the needed files to send off to get printed and you can order the dcim analogs.

Sent from my SM-N950U using Tapatalk
 
Contraluz

Contraluz

Well-Known Member
Donator
Full Member
Messages
1,881
Reaction score
275
Thanks Sevan! I think I do have the correct library. Got em from Zimmer directly... I will PM you.
 

Similar threads

J
Replies
4
Views
2K
Andrew Priddy
Andrew Priddy
TheLabGuy
Replies
165
Views
36K
JustDavid
J
D
Replies
0
Views
736
dandyfop
D
Top Bottom