My sintra plus sintering oven won’t heat up

idrg

idrg

Member
Full Member
Messages
25
Reaction score
4
Hello
Happy New Year
I have two Sintra plus sintering furnace and both of them have same problem.
It’s not heating at all.
I recently replaced the heating element and still no good .
Anyone had same issues, please let me know how you fixed it.
Thank you
 
idrg

idrg

Member
Full Member
Messages
25
Reaction score
4
Is this normal that firing tray doesn’t go up all the way flush with ceiling panel?
 

Attachments

  • 91BAF03C-94DE-4C15-816E-5FDF1012A96D.jpeg
    91BAF03C-94DE-4C15-816E-5FDF1012A96D.jpeg
    86.6 KB · Views: 8
Holy

Holy

Member
Full Member
Messages
42
Reaction score
1
there is a big fat fuse at the back of unit. please check.
 
zero_zero

zero_zero

Well-Known Member
Full Member
Messages
5,526
Reaction score
1,397
Also check your connection cables ( thick copper solid wire )
 
N

Nenad

Member
Full Member
Messages
26
Reaction score
1
Hello
Happy New Year
I have two Sintra plus sintering furnace and both of them have same problem.
It’s not heating at all.
I recently replaced the heating element and still no good .
Anyone had same issues, please let me know how you fixed it.
Thank you
Check fuse at back take cover out and there is 3 fuses if not there is one main fuse 100A after taking front panel on left front side of furnace.
 
Wainwright

Wainwright

Active Member
Full Member
Messages
213
Reaction score
43
Fuse or heating elements, the elements are in series so if one of them is bad it will break the connection. The spacing in the second photo is pretty normal.
 
L

lifelikedental

Member
Full Member
Messages
85
Reaction score
20
Hello
Happy New Year
I have two Sintra plus sintering furnace and both of them have same problem.
It’s not heating at all.
I recently replaced the heating element and still no good .
Anyone had same issues, please let me know how you fixed it.
Thank you
SINTRA PLUS SINTERING FURNACE IS ****ING GARBAGE

I spent so much money replacing parts for this furnace and I gave up fixing it.

I use it as a vacuum now because its collecting dust.
 
TheLabGuy

TheLabGuy

Just a Member
Full Member
Messages
5,359
Reaction score
817
SINTRA PLUS SINTERING FURNACE IS ****ING GARBAGE

I spent so much money replacing parts for this furnace and I gave up fixing it.

I use it as a vacuum now because its collecting dust.
Ditto...worth 10K i ever spent. Mine wouldn't heat up either...then I tore it apart and pulled the heat shield sleeve back on the wire running from under the table to the heating elements and found the wire burned into half. I snipped the bad areas and bought a heavy duty connector and got it running again but it's a fire hazard and after a day I went an purchased a couple S1's. Sintra's are Complete garbage!!! P.S. it was three days out of warranty...happened on the 368 day. Wouldn't honor warranty.
 

Similar threads

R
Replies
7
Views
599
M
A
Replies
0
Views
151
AKDental
A
C
Replies
6
Views
212
CJK Dental Lab
C
T
Replies
2
Views
306
FASTFNGR
F
Top Bottom