B
Bzydo23
Member
Full Member
- Messages
- 84
- Reaction score
- 0
Just got a new client that places Mini implants, any idea on what cement gap I should use on something like this? Was thinking something around 0.04 -.05
Thanks
Thanks
We dont like minisJust got a new client that places Mini implants, any idea on what cement gap I should use on something like this? Was thinking something around 0.04 -.05
Thanks
appreciate the tips! Case ended up working out and fitting great.We dont like minis
To answer you though, it depends on your results. There are multiple variables, so I suggest if you like your normal gap for tooth supported restorations, and you (like me) tighten up a bit on Ti abutments, Id suggest what ever youre using to design for an accurate fit on screw retained stuff would be a good start. If you use bur compensation, those tiny things could create a loose fit, so its a try and adjust thing. No one answer.
I trust hes only placing them for single unit lower incisors...?
What did you end up using as gap assumptions and such settings?appreciate the tips! Case ended up working out and fitting great.
Enter 2 teeth in DB. Start design as a couple bicuspids and go to expert mode to connect them, then blur the junction and morph into a molar.Minimal Thickness 0.5
Gap width of cement 0.05
My other question is, he gave me a new case for #31 this impression has 2 DMI implants for the single tooth. Any ideas on how to make 2 seperate preps with Zirconia btw the 2?
No rush, I have a good amount of time on the case.@2thm8kr
Sorry to bug you, but how would you do one like this?
@zero_zero ??
Im pretty sure using a pontic as the starting tooth form works, and then would also allow adapting to the gingiva if you have that scan, but I think it has to be entered as something different in DB?
So the group Exocad experts on Facebook just uploaded an entire tutorial on the exact type of case design I am working on! Appreciate all the help on this thread. Have a great weekend to the lab guys that dont work 7 days a weekNo rush, I have a good amount of time on the case.
Link?So the group Exocad experts on Facebook just uploaded an entire tutorial on the exact type of case design I am working on! Appreciate all the help on this thread. Have a great weekend to the lab guys that dont work 7 days a week