S
sierra
Member
Full Member
- Messages
- 15
- Reaction score
- 1
has anyone gotten the message error tool is broken and the mill stops when the burr is not broken,rolanddwx50 3 shape
Did it happen more than once?has anyone gotten the message error tool is broken and the mill stops when the burr is not broken,rolanddwx50 3 shape
Did it happen more than once?
If so, does it happen:
with every material
in a similar location
When it is actively cutting material
with the burr embedded in material
with the burr just hanging out in free space
The sensor is likely picking up an overamperage trying to turn the burr or a lower spinrate than it should have and thinks the burr has stuck.
Someone will likely have a great answer, but it ain't me. Just want to give you the best chance of getting a good answer by getting some more troubleshooting info.
Edit: you've been having lots of trouble withnthat mill lately. Ever get it to a fixin'n people place?
https://dentallabnetwork.com/forums/threads/roland-dwx50.29244/post-297577
Best I've got for you is try reading the backlog of posts with dwx50 in them and see if something looks likely possible.yes it does happen everytime ,about 1 to 2 hours into milling it will attempt to pick up a burr then error out burr is broken,i have just had the mill refurbished one week ago,no one has an answer.thank you for your reply