zero_zero
Well-Known Member
Full Member
- Messages
- 6,303
- Reaction score
- 1,397
1. Open the case, load scene file.So I made it through a design and realized I didn't have enough space. Doc says to reduce prep. so i says to myself i says, "delete merged parts, go to expert and free form scan data." wouldn't let me unless I deleted constructed parts. So Bite the bullet and do it. Now I can virtually reduce the prep. Sadly I have to redesign. So I mill it and find out when I redid crown bottoms it didn't adapt to the newly reduced prep. So i have to remill. I really don't want to have to delete constructed parts so I can try again to virtual reduce prep. any way to keep the design? Also, why didn't it adapt to reduced prep? I can see where it I reduced and I can see how the crown follows the pre-virtual prep when I do a cut view
2. Go expert if you not already in expert mode
3. Delete constructed parts
4. Turn off the visibility for everything but the prep scan
5. Right click, then free form the way you like it
6. Right click the prep again to set the insertion path again
7. Right click, do the cement spacer / crown bottom <--something along that line, can't remember
8. Right click, merge and save
Done