Itero articulator Full Arch File Exocad

S

sirmorty

Active Member
Full Member
Messages
610
Reaction score
37
Does anyone have the file for the full arch Itero Articulator? Looking to Print the model.

It's longer then the Quadrant one.

I managed to find the small one but I can't get it to load on Exocad on the desktop pc , Although it does work on the laptop. Not sure what I did different there.
 
afelab2013

afelab2013

Member
Full Member
Messages
38
Reaction score
2
hello send me your e-mail that you turn Itero file
 
afelab2013

afelab2013

Member
Full Member
Messages
38
Reaction score
2
ecco i file
 

Attachments

  • iTero_Narrrow.zip
    916 KB · Views: 235
  • iTero_Wide.zip
    1 MB · Views: 217
S

sirmorty

Active Member
Full Member
Messages
610
Reaction score
37
Awesome, thanks so much!

The seem to line up great. Hopefully when it will work out when I print them out.

thanks again.
 
EJADA

EJADA

Well-Known Member
Full Member
Messages
781
Reaction score
116
Thank you for this. I have used this successfully several times. I have had a few models it seems to error on no matter what i do. Any suggestions?
 
Andrew Priddy

Andrew Priddy

Well-Known Member
Donator
Full Member
Messages
1,553
Reaction score
199
38mm needs to be your model height with the iTero
 
D

DentalFusion

Member
Full Member
Messages
9
Reaction score
0
Does anyone have this model attachment that fits the Itero articulator in STL? So that I can use it in MEshmixer or import it to my design software
 
Last edited:
DigiSculpt Design Center

DigiSculpt Design Center

Active Member
Full Member
Messages
104
Reaction score
0
Does anyone have this model attachment that fits the Itero articulator in STL? So that I can use it in MEshmixer or import it to my design software
I couldn't find it so I modeled it quick, give it a beta test before using on a live case, let me know if it needs to be adjusted itero Drawing.png
 

Attachments

  • Body1.stl
    419.9 KB · Views: 22
  • Body2.stl
    419.6 KB · Views: 17
  • iTero Scene.stl
    774.2 KB · Views: 18
Last edited:

Similar threads

Top Bottom