doflab0070
Active Member
Sponsors
Full Member
- Messages
- 334
- Reaction score
- 7
Last lesson was about how to create a library using Tooth Model Editor.
Now, you need to set up the library in exocad.
Today’s lesson is about how to set up a library in exocad.
#EdwinCADCAMClass #toothmodeleditor #exocad
<Click the below image to watch the video>
If you have any questions, please contact on [email protected]
Visit our website https://doflab.com/
Now, you need to set up the library in exocad.
Today’s lesson is about how to set up a library in exocad.
#EdwinCADCAMClass #toothmodeleditor #exocad
<Click the below image to watch the video>
If you have any questions, please contact on [email protected]
Visit our website https://doflab.com/
