J
josepedrojesus
New Member
- Messages
- 1
- Reaction score
- 0
I'm researching to buy a new milling machine. I'm looking at vhf r5, imes icore pro + and ivoclar PM7.
Which ones do they advise?
Thank you
Which ones do they advise?
Thank you
So do you use it wet and dry and for all of those materials?we have a pm7. we had some bad luck with our first and second units being faulty. but the new one is working perfectly fine, and very happy with it. very versatile, can do metal, emax, pmma, zircona, wax, both wet and dry. and of course, ivoclar's support is top notch.
So do you use it wet and dry and for all of those materials?
I always believed in Japanese product, Roland is the one for me for dry milk. 3years and not even a sneeze.I'm researching to buy a new milling machine. I'm looking at vhf r5, imes icore pro + and ivoclar PM7.
Which ones do they advise?
Thank you
Hi Joseph, take a look at the mills on our website: www.axsysdental.com call me if you have questions happy to help. 248-926-8810I'm researching to buy a new milling machine. I'm looking at vhf r5, imes icore pro + and ivoclar PM7.
Which ones do they advise?
Thank you
I have the preciso 200 (4) and every once and a while the mill will freeze with spindle, air, and vacuum still running. The problem is a the file window to select a disc pops up all by itself. As soon as I close that window the mill starts cutting again. I'm not sure why that window pops open and why the mill freezes but it has prevented me from trusting the mill to work at night which sucks. Doesn't sound like your problem exactly but maybe there's a window or program that turns on in the background?As long as I have a lot of experts checking in, I have a Preciso 205(VHF K5). The problem I run into is sometimes it loses connection with the software(CNC). It was upgraded with the new board and ethernet connection. I currently have the mill connected to the computer through a switch(netgear Pro jg5624). Sometimes when running a job, it just pauses and when I try to stop program with the red button in the CNC software, it doesn't respond. I have to shut down the machine with power switch and use task manager to stop software and restart.... sometimes it doen't wreck anything and sometimes it does? Jensen has looked into with no luck, anyone else have this issue, I just don't get how the software loses connection with computyer as I said it requires me to open task manager and manually end task, to which it says not responding.......Thanks in advance!
yepJensen has checked the logs and cannot find anything that points to the interruption? I thought a managed switch might help, but it only happens maybe once or less a month. When u say a disk pops up, you mean the CAM opens and asks you to select a disk?