Have anybody ever heard of ilerimplant? (GMI implants)

[WENDY]

I have a case using implants system from ilerimplant (GMI frontier).
This is my first time seeing this brand.
They are from Spain and can not find any distributors in the US.

Does anybody happen to know anything about this brand?

I'm hoping to find scan bodies and ti-bases I can use for this case.
Thank you so much for the help.

 

[JMN]

I have a case using implants system from ilerimplant (GMI frontier).
This is my first time seeing this brand.
They are from Spain and can not find any distributors in the US.

Does anybody happen to know anything about this brand?

I'm hoping to find scan bodies and ti-bases I can use for this case.
Thank you so much for the help.

Well, there are four different interfaces, so what are you working with?

https://www.ilerimplant.com/en/products/gmi-implants.html

From there solutions can be found or beat into place.

 

[lcmlabforum]

I think he is using the Frontier
https://www.ilerimplant.com/en/tecnical-specifications-frontier.html
which might be compatible with most generic internal hex, but series has an RP and WP
so not sure which diameter he has.
LCM

 

[WENDY]

Well, there are four different interfaces, so what are you working with?

https://www.ilerimplant.com/en/products/gmi-implants.html

From there solutions can be found or beat into place.

Working with Frontier... I heard they are compatible with Zimmer as well.

 

[WENDY]

I think he is using the Frontier
https://www.ilerimplant.com/en/tecnical-specifications-frontier.html
which might be compatible with most generic internal hex, but series has an RP and WP
so not sure which diameter he has.
LCM

The diameter is 4.25 Frontier RP

 

[lcmlabforum]

I would just try a Zimmer 4.1mm TSV impression post
My 2 cents
LCM

 

[bttdmd]

The diameter is 4.25 Frontier RP

Wendy, I know this is an old post but our office is in the same situation and I wondered if you were able to find a compatible system for the GMI. Our pt has a Frontier RP 4.25 and a Frontier RP 3.75 implant that were done in Dubai. Our Doctor called Zimmer and they had no helpful information. Did you use the Zimmer one that was suggested? Thanks in advance for your help. -Carrie

 

[Soniq]

Unfortunately, Frontier has a 1.8 mm internal thread.
Zimmer Screw-Vent have a 1-72 thread which is more course as is not compatible.

There is an internal hex implant in the U.S. called Renova with a 1.8 mm internal thread but I'm not sure if it's exactly compatible.
Renova
Mack Biomedical LLC
Ray Stankevicius
Chicago, IL
773-752-1225


Darwin








Renova

 

[bttdmd]

Unfortunately, Frontier has a 1.8 mm internal thread.
Zimmer Screw-Vent have a 1-72 thread which is more course as is not compatible.

There is an internal hex implant in the U.S. called Renova with a 1.8 mm internal thread but I'm not sure if it's exactly compatible.
Renova
Mack Biomedical LLC
Ray Stankevicius
Chicago, IL
773-752-1225


Darwin







Renova

Thank you for the info!

 

[CoolHandLuke]

Hate to have that last name.

Stankevicious.

 

[Rotta]

I have a case using implants system from ilerimplant (GMI frontier).
This is my first time seeing this brand.
They are from Spain and can not find any distributors in the US.

Does anybody happen to know anything about this brand?

I'm hoping to find scan bodies and ti-bases I can use for this case.
Thank you so much for the help.

Hi I was looking for GMI brand implants too here please if you find any place here in US let me know
Thanks

 

[keith goldstein]

we helped a client with this implant and my notes state to use the zimmer internal hex connection parts with 3.5 platform and use the nobel replace NP screw which is a M1.8 - we can help you with both parts