NDLMilling
Member
Full Member
- Messages
- 70
- Reaction score
- 4
Job Description
Looking for an experienced Ceramist in the Temecula area. Must have at least 3 years' experience. Need someone who is motivated and dependable.
Essential Duties and Responsibilities:
Use high and low-speed handpieces to perform finishing tasks on Zirconia and perform final preparations per Rx instructions.
*
Assist with other department duties as needed and as instructed by Supervision.
Monday - Friday 8am - 5pm
Pay BOE
Job Type: Full-time
Send resume to [email protected]
Looking for an experienced Ceramist in the Temecula area. Must have at least 3 years' experience. Need someone who is motivated and dependable.
Essential Duties and Responsibilities:
- Perform quality assurance by checking the units for defects (cracks, chips, incomplete sintering/milling, shade problems, etc.);
- review case pans against work ticket and Rx for accuracy, and ensure the correct number of units.
- Multi-shading green state units and/or bridges as specified on the work instructions and RX.
- Per RX instructions and shade requirements apply stain and glaze using the appropriate formula to match the shade guides for Zirconia restorations.
- Load shaded units into the porcelain oven and run an appropriate cycle for stain and/or glaze.
- Use high and low-speed handpieces to perform final preparations per Rx instructions and as required for interproximal, occlusal adjustments, steam cleaning, and sandblasting.
- When applicable check the fit of the restoration on the Stone or RP printed model and check for defects.
- Use high and low-speed handpieces to cut units out of discs when the milling cycle is complete and load units into sintering furnace(s).
Use high and low-speed handpieces to perform finishing tasks on Zirconia and perform final preparations per Rx instructions.
*
Assist with other department duties as needed and as instructed by Supervision.
Monday - Friday 8am - 5pm
Pay BOE
Job Type: Full-time
Send resume to [email protected]