Error A motor position is Lost (DWX-50)

userdental

userdental

Member
Full Member
Messages
5
Reaction score
0
hola, ¿alguien puede ayudarme con este error que me aparece en mi fresadora DWX-50?
 
userdental

userdental

Member
Full Member
Messages
5
Reaction score
0
hello, can someone help me with this error that I am getting on my milling machine DWX-50?
 
C

Calton

New Member
Messages
3
Reaction score
0
I've been having the same issue. Someone told me a while back to try a different USB port, and cable before anything else. I did this and it worked for months however the problem did return. I have lubricated top and bottom rails, and recalibrated. But i started getting " Z motor position Lost" as well. Trying to complete a calibration to see if it fixes itself.
 
N

Nazar

Member
Full Member
Messages
43
Reaction score
0
Try to check the stepper motors cables . Bad contact may cause this
 
A

andreimihu

New Member
Messages
2
Reaction score
0
I've been having the same issue. Someone told me a while back to try a different USB port, and cable before anything else. I did this and it worked for months however the problem did return. I have lubricated top and bottom rails, and recalibrated. But i started getting " Z motor position Lost" as well. Trying to complete a calibration to see if it fixes itself.
Hi Calton,

Did u manage to resolve the “Z motor position lost”?
 
Top Bottom