ep600combi press plunger blocked

D

Dorian Dibra

Member
Full Member
Messages
16
Reaction score
0
hi the press plunger is getting blocked during start up, it can't be lifted up totally! any suggestion...
 
D

Dorian Dibra

Member
Full Member
Messages
16
Reaction score
0
Also some air is coming out from the gasket up in the press plunger and 100% vacuum can’t be reached
 
GG - J

GG - J

Active Member
Full Member
Messages
408
Reaction score
14
Is this a new issue or have you pressed in the past ?

Try to clean the gasket or if appears dried out order a new one or
You can use a tiny amount of petroleum jelly around the gasket but at best probably a short term fix
 
D

Dorian Dibra

Member
Full Member
Messages
16
Reaction score
0
Is this a new issue or have you pressed in the past ?

Try to clean the gasket or if appears dried out order a new one or
You can use a tiny amount of petroleum jelly around the gasket but at best probably a short term fix
i ordered a new gasket, but it seems i have a mechanical problem also up ine the press mechanism
 
W

Wechez

Member
Full Member
Messages
23
Reaction score
0
i ordered a new gasket, but it seems i have a mechanical problem also up ine the press mechanism
I do have an EP600 combi which am planning to dispose. If you need it let me know. Its still in mint condition.
 

Similar threads

Top Bottom