DWX-50 not calibrating

D

DawgFan101

Member
Full Member
Messages
17
Reaction score
0
Having issues calibrating one of our DWX-50 machines. It gets about halfway through the calibration, and suddenly stops (always at the same spot) and gives me a "door open" message of a "clean away cutting waste" message. The door is not open and the inside of the machine is cleaner than those who didnt kill Epstein. And when it stops, the calibration tool is not even touching anything, its in mid air. Weird.
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
Turn it off, unplug it, wait a while and try again. Ensure you move the head around and make the machine go 'home' before you start calibrating next time.
 
Implant LabGuy

Implant LabGuy

New Member
Full Member
Messages
7
Reaction score
0
Yes I agree....Turn it off, unplug it, wait a while and try again. Ensure you move the head around and make the machine go 'home' before you start calibrating next time.
 
Top Bottom