J
jack1
Member
Full Member
- Messages
- 12
- Reaction score
- 0
Hi guys, I need help deciding which company I should go with? any advice is highly appreciated, thanks in advance
thank you , I'm between HD and UHD, I've been told UHD needs advanced computer with better graphic card and processor, do you think HD is enough for a dental lab, I've heard both of them are pretty accurate, I personally want the UHD but I don't know the difference, it is going to be my first scanner, once again thank you for sharing your experience.We have a DOF HD and it is a great piece of equipment.
any preference ?? HD vs UHD??
thank youI'm a Medit guy myself, had medit scanners since 2009 from FMRs, to multiple implant cases and denture scans in 12 secs with the T700. I don't have anything bad to say about DOF either, great scanner. I know my friends that do large implant cases prefer to use UHD due to the cross arch accuracy being better is what they told me.
my CPU is I5, and I bought the computer just 6 months ago, it's Lenovo Legion T5 26IOB6, good graphic card, I will most probably go with the UHD , since it has the 5 MP camera, even though the HD has a 2MP camera but the accuracy on both is 7 micron, it's a little confusing, I can't thank you enough for your feedbackDOF has been our workhouse for 6 years. Only one issue in all those years and it was a simple over the phone solution with minimal disassembly. If your computer is less than 3 years old and does designing I don’t see any issues with the UHD version.
What's not to trust? I'm curious.I dont trust DOF, Medit does the job.
Depends on your downstream inputs. The HD scans in the 10 micron range of accuracy where the UHD is sub 5. If you want to do milled bar restorations, definitely the UHD. Otherwise the HD is a great scanner. I have had mine for 5 years, no problems.any preference ?? HD vs UHD??
I have a feeling it has to do with the DOF Mill they ended up pulling out.What's not to trust? I'm curious.
DOF HD will do all you need. If you want an upgrade in the future I was quietly told it's possible to swap cameras for the UHD. Same box and mechanics. Great scanner.
I will probably go with the HD then , since everyone is saying it will do the jobDOF HD will do all you need. If you want an upgrade in the future I was quietly told it's possible to swap cameras for the UHD. Same box and mechanics. Great scanner.
Keep in mind if you want to impression scan it's not always straight forward. You usually can get it, but are best pouring a single die and adding it to the scan for accuracy.I will probably go with the HD then , since everyone is saying it will do the job
do you think it’s straight forward with the UHD ?Keep in mind if you want to impression scan it's not always straight forward. You usually can get it, but are best pouring a single die and adding it to the scan for accuracy.
I really doubt it. I believe the camera spacing and position remain the same, only the resolution changes. DOF is a sponsor here, they can chime in if I'm incorrect. BTW, happy with their customer service when I had an early issue. Last problem I had too and that was in 2016.do you think it’s straight forward with the UHD ?