Dof Scanapp 0% problem

E

Excluded

New Member
Hello there. I need your help. I gathered the system for Exocad
exocad program was running weak on old( old system) computer.
so I've collected a new system.
My new system.It does not work well
my old system work well. I don't know what the problem is
Although my new system is powerful. is running bad from my old computer
Will you help me with this problem ?. Thank you for helping

completing 3 seconds on my old computer
but my new computer takes 20-30 seconds.
and sometimes he can't do any
I wrote drivers updated. I tried the old version or the new version of the Scan App program
2 times format. the problem is not correcting.
please look this video:




new system:
CPU:Intel Core i9-9900K Desktop Processor 8/core 16/tread 5.0 GHz
GPU:MSI GAMING GeForce RTX 2070 8GB GDRR6 256-bit
MBU:MSI MAG z390-plus
RAM:Corsair Vengeance LPX 32GB (4 X 8GB) DDR4 3000
PSU:EVGA 750 Watt 80+ Plus Bronze Certified Modular Power Supply (CP-9020103-NA)
HDD:Seagete 2TB PC Hard Drive - 7200 RPM Class
SSD:WD Blue 500GB m.2ssd 1700mb/s
COOLER:COOLer master Captain 240L RGB V2, AIO Liquid CPU Cooler, Anti-Leak Technology
CASE:Thermaltake
OS:Windows 10 x64


old system:

CPU:Intel Core i5-9600K
GPU:MSI GAMING GeForce GTX 1060 6GB GDRR6 256-bit
MBU:ASUS TUF z370
RAM:Corsair Vengeance LPX 16GB (2 X 8GB) DDR4 3000
PSU:Thermaltake 600 Watt 80 Plus Bronze Certified Modular Power Supply (CP-9020103-NA)
HDD:Seagete 2TB PC Hard Drive - 7200 RPM Class
SSD:WD Blue 500GB m.2ssd 1700mb/s
COOLER DEEPCOOl Air.
CASE:Thermaltake
OS:Windows 10 x64
 
user name

user name

Well-Known Member
Donator
Full Member
Who did you buy your ExoCAD program from? Id ask them to take a look.
Im not a computer guy...but does your mother board support DDR4? Have you tried your RAM in different slots? I dont think they should be installed in pairs.If you have slots A1 B1, A2 B2, they should be in A1 B1. Have you checked that your RAM is clocked at the same speed?
 
E

Excluded

New Member
Who did you buy your ExoCAD program from? Id ask them to take a look.
Im not a computer guy...but does your mother board support DDR4? Have you tried your RAM in different slots? Have you checked that your RAM is clocked at the same speed?
yes of course it supports
all of the ram works 3000mhz
 
Guest Room
Help Users
  • No one is chatting at the moment.
  • Chat Bot:
    Room has been pruned!
    Chat Bot: Room has been pruned!
    Top Bottom