• Welcome to Dental Lab Network

    Help Wanted Dental Lab Technician Needed Houston

    Discussion in 'Help wanted' started by arnau aparicio, Jan 12, 2018.

    1. arnau aparicio

      arnau aparicio New Member

      Joined:
      Jan 2018
      Messages:
      2
      Likes Received:
      0
      Quality Dental Team in Houston, Texas is hiring a dental technician.
      We are looking for someone with 3-5 years experience
      We need someone that can make

      • bite blocks
      • custom trays
      • plaster work
      • repairs
      • relines
      • processing.
      • ceramics
      • cad cam
      We are willing to discuss and negotiate pay rate.

      Quality Dental Team works is a dental office in Houston, Texas. We are currently seeking a highly motivated and mature individual to join our growing team. The successful applicant will primarily manufacture and repair dentures. Crown and bridge work, including the use of CAD/CAM processes can also be expected. Attention to detail, strong work ethic, pride in craftsmanship and the ability to work well as a strong individual within a dynamic team are essential.
       
    2. Doris A
      Amused

      Doris A Well-Known Member Donator Full Member

      Joined:
      Jul 2011
      Messages:
      1,929
      Likes Received:
      931
      Location:
      Virginia Beach
      Good luck with that. Someone with 3-5 years experience isn't even going to begin to know a fraction of what you want.
       
      • Agree Agree x 6
    3. rkm rdt

      rkm rdt Well-Known Member Full Member

      Joined:
      Nov 2007
      Messages:
      15,323
      Likes Received:
      3,136
      Location:
      right here,right now
      Yes but some old codger like me who hates the snow and liberals might.
       
      • Funny Funny x 2
      • Like Like x 1
    4. Wade Bognuda
      Busy

      Wade Bognuda Active Member Full Member

      Joined:
      Aug 2016
      Messages:
      182
      Likes Received:
      59
      And, it pays $11.00 an hour.
       
    5. Doris A
      Amused

      Doris A Well-Known Member Donator Full Member

      Joined:
      Jul 2011
      Messages:
      1,929
      Likes Received:
      931
      Location:
      Virginia Beach
      Are you going to apply? Isn't that a little too close to gator country for you? Even though your avatar says you're in Naples Laugh
       
    6. Doris A
      Amused

      Doris A Well-Known Member Donator Full Member

      Joined:
      Jul 2011
      Messages:
      1,929
      Likes Received:
      931
      Location:
      Virginia Beach
      You're kidding, right?!?!
       
    7. Wade Bognuda
      Busy

      Wade Bognuda Active Member Full Member

      Joined:
      Aug 2016
      Messages:
      182
      Likes Received:
      59
      Sarcastic. Typically anyone that wants someone with two to three years experience isn't looking to have to pay much as opposed to looking for someone with ten or more years.
       
      • Agree Agree x 2
    8. Randy Hill PhD

      Randy Hill PhD Active Member Full Member

      Joined:
      Apr 2011
      Messages:
      115
      Likes Received:
      25
      44 yrs. of experience setting up dentures, C&B, some CAD/CAM, owned my own lab for 34 yrs.. At 62, I think I'm as mature as I'm going to get. An old analog technician, so I still remember pride in craftsmanship, and detail. I've only missed about week from work, and that included the days of surgery, but, with the race to the bottom prevalent in our industry, the highly motivated part is giving me some issues! LOL
      Since WalMart is now paying $11/hr., there would have to be plenty of room for negotiation. Lol
       
      • Like Like x 3
    9. rkm rdt

      rkm rdt Well-Known Member Full Member

      Joined:
      Nov 2007
      Messages:
      15,323
      Likes Received:
      3,136
      Location:
      right here,right now
      You can park the rv in their lot for free too.
       
      • Like Like x 2
    10. Flippercentral

      Flippercentral Well-Known Member Full Member

      Joined:
      Aug 2008
      Messages:
      1,873
      Likes Received:
      178
      There used to be a dental lab school down at the UT Health Science center in San Antonio. I believe it was closed down a few years ago ), however I really enjoyed going there for CE, met Dr's Rudd, Shipman (young and old) and Massad. The school may have moved elsewhere, but for what you are asking the best you can get is a recent grad from the school (is the Harligen school still open , that's another option.). Not many out there will know both removable and fixed, much less cad to go along with this, you may need to hire what you think you need most and train for the rest.
       
      Last edited: Jan 14, 2018
      • Like Like x 2
    11. Inna-Hurry

      Inna-Hurry Active Member Full Member

      Joined:
      Jul 2012
      Messages:
      154
      Likes Received:
      30

      And have your lab in it with the compressor and hot tub on a trailer behind.
       
      • Like Like x 1
    12. EJADA
      Amused

      EJADA Well-Known Member Full Member

      Joined:
      Sep 2010
      Messages:
      736
      Likes Received:
      116
      Location:
      NORTHERN COLORADO
      If ya hate liberals don’t go to Houston
       
      • Informative Informative x 1
    13. rkm rdt

      rkm rdt Well-Known Member Full Member

      Joined:
      Nov 2007
      Messages:
      15,323
      Likes Received:
      3,136
      Location:
      right here,right now
      Anyone hiring in flyover country?
       
    14. Randy Hill PhD

      Randy Hill PhD Active Member Full Member

      Joined:
      Apr 2011
      Messages:
      115
      Likes Received:
      25
      But Doris.............................. it's $11.00/hr.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Rv in the back, hot tub, compressor for bubbles (or you have to make your own!) lol
       
      • Funny Funny x 1
    15. Jason D

      Jason D Well-Known Member Full Member

      Joined:
      Jun 2014
      Messages:
      233
      Likes Received:
      102
      For a fully trained denture tech, AND a fully trained ceramics tech AND fully trained Cad cam tech? First of all that’s 10 years experience just tthe cover those disciplines at a level of basic competence. Also extremely unusual to find someone who has such multidisciplinary training. You are talking about less than 1% of technicians.....Yeah I’d pay at least that much too lol
       
    16. arnau aparicio

      arnau aparicio New Member

      Joined:
      Jan 2018
      Messages:
      2
      Likes Received:
      0
      Position has been taken !
      Thank you
       

    Share This Page