Connecting 3shape and exocad

tehnik

tehnik

Active Member
Full Member
Messages
358
Reaction score
12
Hi!

What is the easiest way to connect laboratory 3shape with another labs exocad system? The point is to scan in 3shape and send it to designs in exocad.
 
doug

doug

Well-Known Member
Donator
Full Member
Messages
2,429
Reaction score
375
export files in .stl format
 
tehnik

tehnik

Active Member
Full Member
Messages
358
Reaction score
12
The problem is not there. The files are not encrypted and I am looking for a simple way of sharing. It needs to be done over internet as the machines are not in the same building.
 
JMN

JMN

Christian Member
Full Member
Messages
12,212
Reaction score
1,884
Hi!

What is the easiest way to connect laboratory 3shape with another labs exocad system? The point is to scan in 3shape and send it to designs in exocad.
Well, if they are in different buildings, are they on a local network together? Or they both have internet access but not direct local network?
You're at this point just gonna copy files across the internet. or use shared folders if you have a LAN or even do a PPTP tunnel between machines if you want to get fancy
 
tehnik

tehnik

Active Member
Full Member
Messages
358
Reaction score
12
Different building and not connected directly. I was suggested to use 3shape communicate but I believe it is not integrated with exocad. For now we have shared files over the internet but importing files and making New project are time consuming, when there can be some other importing method.
 

Similar threads

E
Replies
1
Views
128
erzdaemon
E
CatamountRob
Replies
30
Views
1K
Car 54
Car 54
Top Bottom